no Author Contents DOWNLOAD
264 D.H. Shim, T. Lee, J. Lee, J.-Y. Yoo, C.S. Lee Increased resistance to hydrogen embrittlement in high-strength steels composed of granular bainite, Materials Scienced and Engineering A, 700, 473(2017)
263 J.W. Won, S.W. Choi, J.T. Yeom, Y.T. Hyun, C.S. Lee, S.H. Park Anisotropic twinning and slip behaviors and their relative activities in rolled alpha-phase titanium, Materials Science and Engineering A, 698, 54 (2017)
262 S.W. Song, J.H. Lee, T. Lee, C.S. Lee Effect of the amount and temperature of prestrain on tensile and low-cycle fatigue properties of Fe-17Mn-0.5C TRIP/TWIP steel, Materials Science and Engineering A, 696, 493 (2017)
261 S.H. Park, C.S. Lee Relationship between mechanical properties and high-cycle fatigue strength of medium-carbon steels, Materials Science and Engineering A, 690, 185 (2017)
260 S.H. Park, S.G. Hong, J.H. Lee, S.H. Kim, R.Y. Cho, J. Yoon, C.S. Lee Effects of pre-tension on fatigue behavior of rolled magnesium alloy, Materials Science and Engineering A, 680, 351 (2017)
259 S.H. Park, S.G. Hong, J.H. Yoon, C.S. Lee Influence of loading direction on the anisotropic fatigue properties of rolled magnesium alloy, International Journal of Fatigue, 87, 210 (2016)
258 S.W. Song, J.H. Lee, H.J. Lee, C.M. Bae, C.S. Lee Enhancing high-cycle fatigue properties of cold-drawn Fe-Mn-C TWIP steels, International Journal of Fatigue, 85, 57 (2016)
257 S.W. Song, Y.J. Kwon, T.K. Lee, C.S. Lee Effect of Al addition on low-cycle fatigue properties of hydrogen-charged high-Mn TWIP steels, Materials Science and Engineering A, 677, 421 (2016)
256 J.W. Won, D.H. Kim, S.G. Kim, C.S. Lee Anisotropy in twinning characteristics and texture evolution of rolling textured high purity alpha phase titanium, Journal of Alloys and Compounds, 683, 92 (2016)
255 J.W. Won, T.K. Lee, S.G. Hong, Y.M. Lee, J.H. Lee, C.S. Lee Role of deformation twins in static recrystallization kinetics of high-purity alpha titanium, Metals and Materials International, 15, 1 (2016)
254 J.W. Won, Y.M. Lee, J.T. Yeom, G.Y. Lee, C.S. Lee High temperature deformation behavior and microstructure evolution of Ti-4Al-4Fe-0.25Si alloy, Journal of Korean Institute of Metals and Materials, 54, 338 (2016)
253 J.M. Lee, T.K. Lee, D.J. Mon, J.Y. Yoo, C.S. Lee Effects of vanadium carbides on hydrogen embrittlement of tempered martensitic steel, Metals and Materials International, 22, 364 (2016)
252 Y.M. Lee, T.K. Lee, B.H. Kim, C.S. Lee Superior bonding properties of dissimilar steel joint produced by electroslag remelting, Metals and Materials International, 21, 1054 (2015)
251 J. W. Won, K. T. Park, S. G. Hong, C. S. Lee Anisotropic yielding behavior of rolling textured high purity titanium, Materials Science & Engineering A, 637,215 (2015)
250 J.M. Lee, Y.J. Kwon, D.J. Mun, J.Y. Yoo, C.S. Lee Role of Mo/V carbides in hydrogen embrittlement of tempered martensitic steel, Corrosion Reviews, 33, 433 (2015)
249 N.S. Reddy, B.B. Panigrahi, C. M. Ho, J. H. Kim, C. S. Lee Artificial neural network modeling on the relative importance of alloying elements and heat treatment temperature to the stability of alpha and beta phase in titanium alloys, Computational Materials Science, 107, 175 (2015)
248 T. K. Lee, Donald S. Shih, Y. M. Lee, C. S. Lee Manufacturing Ultrafine-Grained Ti-6Al-4V Bulk Rod Using Multi-Pass Caliber-Rolling, Metals, 5, 777 (2015)
247 T.K. Lee, K.T. Park, D.J. Lee, J.W. Jeong, S.H. Oh, H.S. Kim, C.H. Park, C.S. Lee Microstructural evolution and strain-hardening behavior of multi-pass caliber-rolled Ti–13Nb–13Zr, Materials Science & Engineering A, 648, 359 (2015)
246 H. S. Jung, T. K. Lee, I. K. Kwon, H. S. Kim, S. K. Hahn, C. S. Lee, Surface Modification of Multipass Caliber-Rolled Ti Alloy with Dexamethasone-Loaded Graphene for Dental Applications, ACS Applied Materials and Interfaces, 7, 9598 (2015)
245 J.W. Won, C.H. Park, S.G. Hong, C.S. Lee Deformation anisotropy and associated mechanisms in rolling textured high purity titanium, Journal of Alloys and Compounds, 651, 245 (2015)
244 Y. J. Kwon, T. K. Lee, J. M. Lee, Y. S. Chun, C. S. Lee, Role of Cu on hydrogen embrittlement behavior in Fe-Mn-C-Cu TWIP steel, 40, 7409 (2015)
243 T.K. Lee, Eshaan Mathew, Santhosh Rajaraman, Geetha Manivasagam, Ashok Kumar Singh, C.S. Lee Tribological and corrosion behaviors of warm- and hot-rolled Ti-13Nb-13Zr alloys in simulated body fluid conditions, International Journal of Nanomedicine, 10, 207 (2015)
242 Lee, D.J., Jung, J.M., Latypov, M.I., Lee, C.S., Kim, H.S. Three-dimensional real structure-based finite element analysis of mechanical behavior for porous titanium manufactured by a space holder method, Computational Materials Science, 100, 2 (2015)
241 Lee, J.H., Park, S.H., Hong, S.-G., Won, J.W., Lee, C.S. Abnormal texture evolution of rolled Mg-3Al-1Zn alloy containing initial {10-12} twins, Scripta materialia, 99, 21 (2015)
240 Kim, S.M., Kim, J.S., Kim, K.T, Park, Y.S., Lee, C.S. Effect of Si and Ce addition on the microstructure and pitting corrosion resistance of hyper-duplex stainless steels, Corrosion, 71(4), 470 (2015)
239 Lee, T., Nakai, M., Niinomi, M., Park, C.H., Lee, C.S. Phase transformation and its effect on mechanical characteristics in warm-deformed Ti-29Nb-13Ta-4.6Zr alloy, Metals and Materials International, 21(1), 202 (2015)
238 Lee, J.H., Lee, T., Song, S.W., Park, S.H., Lee, C.S. Enhancing yield strength by suppressing detwinning in a rolled Mg-3Al-1Zn alloy with {101-2} twins, Materials Science and Engineering A, 619, 328 (2014)
237 Woo Kim, Y., Hong, S.-G., Huh, Y.-H., Lee, C.S. Role of rolling temperature in the precipitation hardening characteristics of Ti-Mo microalloyed hot-rolled high strength steel, Materials Science and Engineering A, 615, 255 (2014)
236 Kim, Y.W., Kim, J.H., Hong, S.-G., Lee, C.S. Effects of rolling temperature on the microstructure and mechanical properties of Ti-Mo microalloyed hot-rolled high strength steel, Materials Science and Engineering A, 605, 244 (2014)
235 Zhao, J., Jiang, Z., Lee, C.S. Effects of tungsten on the hydrogen embrittlement behaviour of microalloyed steels, corrosion science, 82, 380 (2014)
234 Zhao, Z.Y., Guan, R.G., Wang, X.,Liu, C.M., Lee, C.S. Effects of dynamic recrystallisation during deep rolling of semisolid slab and heat treatment on microstructure and properties of AZ31 alloy, Materials Science and Technology (United Kingdom), 30(3), 309 (2014)
233 Lee, B., Lee, T., Lee, Y., Kim, H.S., Lee, C.S. Space-holder effect on designing pore structure and determining mechanical properties in porous titanium, Materials and Design, 57, 712 (2014)
232 Guo, Q., Chun, Y.S., Lee, J.H., Heo, Y.-U., Lee, C.S. Enhanced low-cycle fatigue life by pre-straining in an Fe-17Mn-0.8C twinning induced plasticity steel, Metals and Materials International , 20(6), 1043 (2014)
231 Won, J.W., Park, C.H., Lee, T., Lee, C.S. Integrated constitutive model for flow behavior of pure Titanium considering interstitial solute concentration, Metals and Materials International, 20(6), 1017 (2014)
230 Um, H.Y., Yoon, E.Y., Lee, D.J., Lee, S., Kim, H.S. Hollow cone high-pressure torsion Microstructure and tensile strength by unique severe plastic deformation, Scripta materialia, 71, 41 (2014)
229 Guan, R.-G., Zhao, Z.-Y., Chao, R.-Z., Liu, X.-H., Lee, C.S. Effects of deformation parameters on formation of pro-eutectoid cementite in hypereutectoid steels, Journal of Central South University, 21(4), 1256 (2014)
228 Park, K.-T., Park, L., Kim, H.J., Kim, S.B., Lee, C.S. Analysis on dynamic tensile extrusion behavior of UFG OFHC Cu, IOP Conference Series Materials Science and Engineering, 63(1) (2014)
227 Lee, J.H., Park, S.H., Kwon, H.S., Kim, G.S., Lee, C.S. Laser, tungsten inert gas, and metal active gas welding of DP780 steel Comparison of hardness, tensile properties and fatigue resistance, Materials and Design, 64, 559 (2014)
226 Taekyung Lee, Yoon-Uk Heo and Chong Soo Lee “Microstructure tailoring to enhance strength and ductility in Ti–13Nb–13Zr for biomedical applications”, Scripta Materialia 69, pp. 785–788 (2013)
225 Wang Wenke, Chongsoo Lee “Experimental and Finite Element Analyses of Plastic Deformation in the Compressive Stage of Copper in High-Pressure Torsion” Rare Metal Materials and Engineering, (2013)
224 Zhan Yong Zhao, Chong Soo Lee “Microstructure Formation Mechanism and Properties of AZ61 Alloy Processed by Melt Treatment with Vibrating Cooling Slope and Semisolid Rolling”, Met. Mater. Int., Vol.19, pp 1063-1067, (2013)
223 Ren Guo Guan, Chong Soo Lee, and Chun Ming Liu “Boundary Layer and Cooling Rate and Microstructure Formation on the Cooling Sloping Plate”, Met. Mater. Int., Vol. 19, No. 5, pp. 949~957 (2013)
222 Sung Hyuk Park , Chong Soo Lee “Enhanced stretch formability of rolled Mg–3Al–1Zn alloy at room temperature by initial{10–12}twins, Materials Science and Engineering A 578, 271-276 (2013)
221 R-G. Guan, Z.-Y. Zhao, X. Wang, C.S. Lee, C.-M. Liu "Microstructure evolution during novel rheorolling process for producing A356 alloy strip", Materials Science and Technology, 29, pp. 587-593 (2013)
220 R.-G. Guan, Z.-Y. Zhao, C. Lian, T. Cui, C.S. Lee "Microstructure formation mechanism and properties of a Mg-3Sn-1Mn (wt%) magnesium alloy processed by a novel semisolid continuous shearing and rolling process", Metals and Materials International, 19, pp. 33-38 (2013)
219 R.-G. Guan, Z.-Y. Zhao, C. Lian, T. Cui, C.S. Lee "Microstructure formation mechanism and properties of a Mg-3Sn-1Mn (wt%) magnesium alloy processed by a novel semisolid continuous shearing and rolling process", Metals and Materials International, 19, pp. 33-38 (2013)
218 C.H. Park, J.H. Kim, J.-T. Yeom, C.-S. Oh, S.L. Semiatin, C.S. Lee "Formation of a submicrocrystalline structure in a two-phase titanium alloy without severe plastic deformation", Scripta Materialia, 68, pp. 996-999 (2013)
217 S.M. Kim, J.S. Kim, K.T. Kim, K.-T. Park, C.S. Lee "Effect of Ce addition on secondary phase transformation and mechanical properties of 27Cr-7Ni hyper duplex stainless steels", Materials Science and Engineering A, 573, pp. 27-36 (2013)
216 Jingwei Zhao, Taekyung Lee, Jeong Hun Lee, Zhengyi Jiang & Chong Soo Lee “Effects of Tungsten Addition on the Microstructure and Mechanical Properties of Microalloyed Forging Steels”, Metallurgical and Materials Science and Transactions A, 44A, pp. 3511-3523 (2013)
215 K.-T. Park, L. Park, H.J. Kim, S.B. Kim, C.S. Lee "Dynamic tensile extrusion behavior of coarse grained and ultrafine grained OFHC Cu", Materials Science and Engineering A, 569, pp. 61-70 (2013)
214 Jingwei Zhao, Zhengyi Jiang, Ji Soo Kim, Chong Soo Lee “Effects of tungsten on continuous cooling transformation characteristics of microalloyed steels”, Materials and Design 49, pp. 252–258 (2013)
213 Wenke Wang, Yuepeng Song, Dongsheng Gao, Eun Yoo Yoon, Dong Jun Lee, Chong Soo Lee, and Hyoung Seop Kim “Analysis of Stress States in Compression Stage of High Pressure Torsion Using Slab Analysis Method and Finite Element Method", Met. Mater. Int., Vol. 19, No. 5, pp. 1021~1027 (2013)
212 R. G. Guan, Z. Y. Zhao, Q. S. Zhang, C. S. Lee and C. M. Liu ” Effect of the casting temperature on temperature field and microstructure of A2017 alloy during an innovativecontinuous semisolid rolling process with a vibrating sloping plate device”, Int J Adv Manuf Technol 67, pp. 917–923 (2013)
211 M. Koyama, T. Lee, C.S. Lee, K. Tsuzaki "Grain refinement effect on cryogenic tensile ductility in a Fe-Mn-C twinning-induced plasticity steel", Materials and Design, 49, pp. 234-241 (2013)
210 Joo Hyun Ryu, Sung Kyu Kim, Chong Soo Lee, Dong-Woo Suh and H. K. D. H. Bhadeshia “Effect of aluminium on hydrogen-induced fracture behaviour in austenitic Fe–Mn–C steel”, Proc. R. Soc. A, 469, 20120458 (2013)
209 Y. Song, W. Wang, D. Gao, E.Y. Yoon, D.J. Lee, C.S. Lee, H.S. Kim "Hardness and microstructure of interstitial free steels in the early stage of high-pressure torsion", Journal of Materials Science, 48, pp. 4698-4704 (2013)
208 T. Lee, J.H. Kim, S.L. Semiatin, C.S. Lee "Internal-variable analysis of high- temperature deformation behavior of Ti-6Al-4V A comparative study of the strain-rate-jump and load-relaxation tests", Materials Science and Engineering A, 562, pp. 180-189 (2013)
207 R-G. Guan, Z.-Y. Zhao, H. Zhang, T. Cui, C.S. Lee "Microsturcture and properties of Mg-3Sn-1Mn (wt%) alloy processed by a novel continuous shearing and rolling and heat treatment, Materials Science and Engineering A, 559, pp. 194-200 (2013)
206 J. Zhao, Z. Jiang, C.S. Lee "Effects of tungsten addition and heat treatment conditions on microstructure and mechanical properties of microalloyed forging steels", Materials Science and Engineering A, 562, pp. 144-151 (2013)
205 J. Zhao, Z. Jiang, C.S. Lee "Enhancing impact fracture toughness and tensile properties of a microalloyed cast steel by hot forging and post-forging heat treatment processess", Materials and Design, 47, pp. 227-233 (2013)
204 J. Zhao, J.H. Lee, Y.W. Kim, Z. Jiang, C.S. Lee "Enhancing mechanical properties of a low-carbon microalloyed cast steel by controlled heat treatment", Materials Science and Engineering A, 559, pp. 427-435 (2013)
203 Sun Mi Kim, Young Soo Chun, Sung Yeun Won, Young Hwan Kim and Chong Soo Lee “Hydrogen embrittlement behavior of 430 and 445NF ferritic stainless steels”, Metallurgical and Materials Science and Transactions A, 44A, pp. 1331-1339 (2013)
202 H.L. Kim , J.-H.Lee , C.S.Lee , W.Bang , S.H.Ahn , Y.W.Chang ” Shear band formation during hot compression of AZ31 Mg alloy sheets”, Materials Science & Engineering A, Vol. 558, pp. 431-438 (2012)
201 Young Soo Chun, Junmo Lee, Chul Min Bae, Kyung-Tae Park and Chong Soo Lee “Caliber-rolled TWIP steel for high-strength wire rods with enhanced hydrogen-delayed fracture resistance”, Scripta Materialia, Vol. 67, issues 7-8, pp. 681-684 (2012)
200 Yuepeng Song, Wenke Wang, Dongsheng Gao, Hyoung-Seop Kim, Eun-Yoo Yoon, Dong-Jun Lee, Chong-Soo Lee and Jing Guo “Inhomogeneous Hardness Distribution of High Pressure Torsion Processed IF Steel Disks”, Materials Sciences and Applications, Vol. 3, pp. 234-239 (2012)
199 Joo Hyun Ryu, Young Soo Chun, Chong Soo Lee, H.K.D.H. Bhadeshia and Dong Woo Suh “Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel”, Acta Materialia, Vol. 60, pp.4085-4092 (2012)
198 Sung Hyuk Park, Seong-Gu Hong, Young Soo Chun, You-Hwan Lee and Chong Soo Lee “High-cycle fatigue characteristics of non-heat-treated steels developed for bolt applications”, Materials Science and Engineering A, Vol. 550, pp.118-124 (2012)
197 Taekyung Lee, Motomichi Koyama, Kaneaki Tsuzaki, You-Hwan Lee, Chong Soo Lee “Tensile Deformation Behavior of Fe-Mn-C TWIP Steel with Ultrafine Elongated Grain Structure”, Materials Letters, Vol. 75, pp. 169-171 (2012)
196 Young Soo Chun, Kyung-Tae Park, and Chong Soo Lee “Delayed Static Failure of Twinning-induced Plasticity Steels”, Scripta Materialia, Vol. 66, pp. 960-965 (2012)
195 Sung Hyuk Park, Seong-Gu Hong and Chong Soo Lee “Multiple twinning modes in rolled Mg-3Al-1Zn alloy and their selection mechanism”, Materials Science and Engineering A, Vol. 532, pp. 401-406 (2012)
194 Hugh J.McQueen, Enrico Evangelista, Michael E. Kassner, and Chong Soo Lee “Thermal and Mechanical Treatments of Al, Al Alloys, and Other LightweightMetals and Alloys”, Journal of Metallurgy, Volume 2012, Article ID 294874, 2 pages doi10.1155/2012/294874 (2012)
193 Jong-Taek Yeom, Jeoung Han Kim, Jae-Keun Hong, Nho-Kwang Park and Chong Soo Lee “Prediction of Microstructure Evolution in Hot Backward Extrusion of Ti-6Al-4V Alloy“, Journal of Metallurgy - Volume 2012, Article ID 989834, 6 pages doi 10.1155/2012/989834 (2012)
192 Ren-guo Guan, Zhan-yong Zhao, Chong Soo Lee “Effect of microstructure on deformation behavior of Ti–6Al–4V alloy during compressing process”, Materials and Design, Vol. 36, pp. 796-803 (2012)
191 Young Soo Chun, Ji Soo Kim, Kyung-Tae Park, Young-Kook Lee and Chong Soo Lee "Role of ε martensite in tensile properties and hydrogen degradation of high-Mn steels" Materials Science and Engineering A, Vol. 533, pp. 87-95 (2012)
190 Chan Hee Park, Young Il Son, and Chong Soo Lee “Constitutive Analysis of Compressive Deformation Behavior of ELI-Grade Ti-6Al-4V with Different Microstructures”, Journal of Materials Science, Vol. 47, pp. 3115-3124 (2012)
189 Renguo Guan, Chong Soo Lee, Qiusheng Zhang, Zhanyong Zhao, and Chunming Liu “Effect of Wavelike Sloping Plate Rheocasting on Microstructures of Hypereutectic Al-18% Si-5% Fe Alloys", Metallurgical Transactions B, Vol. 43B, pp. 337-343 (2012)
188 Taekyung Lee, Chan Hee Park, Sang-Yoon Lee, Il-Heon Son, Duk-Lak Lee and Chong Soo Lee “Mechanisms of Tensile Improvement in Caliber-Rolled High-Carbon Steel”, Metals and Materials International, vol.18, pp 391-396, (2012)
187 Jingwei Zhao, Yong Woo Kim, Jeong Hun Lee, Jin Mo Lee, Hi Sang Chang, and Chong Soo Lee “Effect of Tungsten Addition on the Mechanical Properties and Corrosion Resistance of S355NL Forging Steel”, Metals and Materials International, Vol. 18, pp. 217-223 (2012)
186 Chan Hee Park, Jong Woo Won, Jin-Woo Park, S.L. Semiatin, and Chong Soo Lee “Mechanisms and Kinetics of Static Spheroidization of Hot-Worked Ti-6Al-2Sn-4Zr-2Mo-0.1Si with a Lamellar Microstructure”, Metallurgical and Materials Transactions A, Vol. 43A, pp. 977-985 (2012)
185 Jin-Woo Park, Yusuke Tustusmi, Chong Soo Lee, Chan Hee Park, Youn-Jeong Kim, Je-Hee Jang, Dongwoo Khang, Yeon-Min Im, Hisashi Doi, Naoyuki Nomura, Takao Hanawa “Surface structures and osteoblast response of hydrothermally produced CaTiO3 thin film on Ti–13Nb–13Zr alloy”, Applied Surface Science, Vol. 257, pp. 7856–7863 (2011)
184 J.-T. Yeom, N.-K. Park, T.-J. Shin, S.M. Hwang, S.S. Hong, I.O. Shim, Y H. Lee, and C.S. Lee “Characterization of the interface heat transfer coefficient during non-isothermal bulk forming of Ti–6Al–4 V alloy”, Proceedings of the Institution of Mechanical Engineers Pt. B Journal of Engineering Manufacture, Vol.225, pp.1703-1712 (2011)
183 Motomichi Koyama, Takahiro Sawaguchi, Taekyung Lee, Chong Soo Lee and Kaneaki Tsuzaki “Work Hardening Associated with ε-Martensitic Transformation, Deformation Twinning and Dynamic Strain Aging in Fe-17Mn-0.6C and Fe-17Mn-0.8C TWIP Steels” Materials Science and Engineering A, Vol. 528, pp. 7310-7316 (2011)
182 Taekyung Lee, Chan Hee Park, Duk-Lak Lee and Chong Soo Lee “Enhancing Tensile Properties of Ultrafine-Grained Medium-Carbon Steel Utilizing Fine Carbides” Materials Science and Engineering A, Vol. 528, pp. 6558-6564 (2011)
181 Jeoung Han Kim, S.L. Semiatin, You Hwan Lee, and Chong Soo Lee “A Self-Consistent Approach for Modeling the Flow Behavior of the Alpha and Beta Phases in Ti-6Al-4V” Metallurgical and Materials Transaction A, Vol. 42, pp. 1805-1814 (2011)
180 Yong Woo Kim, Gyosung Kim, Seong-Gu Hong and Chong Soo Lee “Energy based approach to predict the fatigue life behavior of pre-strained Fe-18Mn TWIP steel”, Materials Science and Engineering A- Vol. 5, pp 4696-4702, (2011)
179 Yuepeng Song, Jiangtao Li, Chong Soo Lee and Hyoung Seop Kim “Microstructural Aspects during the Preparation of Y3Al5O12 by Combustion Synthesis and Temperature Field Simulation”, Materials Transactions, Vol. 52, pp 685-690, (2011)
178 Jingwei Zhao, Young Soo Chun and Chong Soo Lee “Hydrogen Embrittlement of Low Carbon HSLA Steel during Slow Strain Rate Test”, Advanced Materials Research, Vol. 197-198, pp. 642-645 (2011)
177 Seong-Gu Hong, Sung Hyuk Park and Chong Soo Lee “Strain path dependence of {10-12} twinning activity in a polycrystalline magnesium alloy” Scripta Materialia, Vol. 64, pp. 145-148 (2011)
176 Chan Hee Park, Seong-Gu Hong, Chong Soo Lee “A unified constitutive model for quasi-static flow responses of pure Ta and Ta-W alloys”, Materials Science and Engineering A, Vol.528, pp.1154-1161 (2011)
175 Byoung Ho Lee, Sung Hyuk Park, Seong-Gu Hong, Kyung-Tae Park, Chong Soo Lee "Role of Initial Texture on the Plastic Anisotropy of Mg-3Al-1Zn Alloy at Various Temperatures", Materials Science and Engineering A, Vol. 528, pp. 1162-1172 (2011)
174 Chan Hee Park, Chong Soo Lee, Youn-Jeong Kim, Je-Hee Jang, Jo-Young Suh, Jin-Woo Park “Improved pre-osteoblast response and mechanical compatibility of ultrafine-grained Ti-13Nb-13Zr alloy”, Clinical Oral Implants Research, Vo. 22, pp. 735-742 (2011)
173 Yuepeng Song, Hyoung Seop Kim, Chong Soo Lee, Jiangtao Li and Jun Pei “Predicting the Adiabatic Temperature of Transparent Y3Al5O12 Prepared via Combustion Synthesis under Ultra-High Gravity”, Materials Transactions, Vol. 51, No. 12, pp. 2230-2235 (2010)
172 Lee Ju Park, Hyung Won Kim, Chong Soo Lee and Kyung-Tae Park “Factors Influencing Tensile Ductility of OFHC Cu Having Different Ultrafine Grained Structures”, Materials Transactions, Vol. 51, No. 11, pp. 2049-2055 (2010)
171 Seong-Gu Hong, Sung Hyuk Park, Chong Soo Lee “Role of (10-12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy”, Acta Materialia, Vol.58, pp.5873-5885 (2010)
170 Sung Hyuk Park, Seong-Gu Hong, Byoung Ho Lee, Wonkyu Bang, Chong Soo Lee “Low-cycle fatigue characteristics of rolled Mg-3Al-1Zn alloy”, International Journal of Fatigue, Vol.32, pp.1835-1842 (2010)
169 Soo-Hyun Joo, Seung Chae Yoon, Chong Soo Lee, Soon Hyung Hong, Hyong Seop Kim "Microstructure and tensile behavior of Al and Al-matrix carbon nanotube composites processed by high pressure torsion of the powders", Journal of Materials Science, Vol. 45, pp. 4652-4658 (2010)
168 C.H. Park, B.G. Lee, S.L. Semiatin and C.S. Lee "Low temperature superplasticity and coarsening behavior of Ti-6Al-2Sn-4Zr-2Mo-0.1Si" Materials Science and Engineering A, Vol. 527, pp. 5203-5211 (2010)
167 Kyung-Tae Park, Kwang Geun Jin, Sang Ho Han, Si Woo Hwang, Kayoung Choi, Chong Soo Lee "Stacking fault energy and plastic deformation of fully austenitic high manganese steels Effect of Al addition", Materials Science and Engineering A, Vol. 527, pp. 3651-3661 (2010)
166 Jingwei Zhao, Hua Ding, Yurong Zhong, Chong Soo Lee "Effect of thermo hydrogen treatment on lattice defects and microstructure refinement of Ti6Al4V alloy", International Journal of Hydrogen Energy, Vol. 35, pp. 6448-6454 (2010)
165 Chan Hee Park, Jin-Woo Park, Jong-Taek Yeom, Young Soo Chun, Chong Soo Lee “Enhanced mechanical compatibility of submicrocrystalline Ti-13Nb-13Zr alloy”, Materials Science and Engineering A, Vol.527, pp.4914-4919 (2010)
164 Seong-Gu Hong, Sung Hyuk Park, Yong-Hak Huh, Chong Soo Lee “Anisotropic Fatigue Behavior of Rolled Mg-3Al-1Zn Alloy”, Journal of Materials Research, Vol.25, pp.966-971 (2010)
163 Sung Hyuk Park, Seong-Gu Hong, Chong Soo Lee “Role of Initial {10-12} Twin in the Fatigue Behavior of Rolled Mg-3Al-1Zn Alloy”, Scripta Materialia, Vol.62, pp.666-669 (2010)
162 Sun Mi Kim, Kwang Tae Kim, Yong Deuk Lee and Chong Soo Lee “Effect of Heat Treatment on Mechanical Properties of Super Duplex Stainless Steel”, Advanced Materials Research, Vol.89-91, pp.290-294 (2010)
161 Sung Hyuk Park, Seong-Gu Hong, Chong Soo Lee “Activation mode dependent {10-12} twinning characteristics in a polycrystalline magnesium alloy”, Scripta Materialia, Vol. 62, No. 4, pp.202-205 (2010)
160 Seong-Gu Hong, Sung Hyuk Park, Chong Soo Lee “Enhancing the Fatigue Property of Rolled AZ31 Magnesium Alloy by controlling {10-12} Twinning-Detwinning Characteristics”, Journal of Materials Research, Vol.25, pp.784-792 (2010)
159 Sung Hyuk Park, Seong-Gu Hong, Wonkyu Bang, Chong Soo Lee “Effect of anisotropy on the low-cycle fatigue behavior of rolled AZ31 magnesium alloy”, Materials Science and Engineering A, Vol. 527, No. 3, pp.417-423 (2010)
158 B.H. Lee, S.M. Kim, M.E. Mehtedi, E. Evangelista and C.S. Lee “Effect of stress state on the high temperature workability of AZ31 Mg alloy”, Metals and Materials International, Vol. 16, No. 2, pp. 197-203 (2010)
157 K. -T. Park, G. S. Kim, S. K. Kim, S. W. Hwang and C. S. Lee “On the Transitions of Deformation Modes of Fully Austenitic Steels at Room Temperature”, Metals and Materials International, Vol. 16, No. 1, pp.1-6 (2010)
156 Jong-Taek Yeom, Jeoung Han Kim, Jae-Keun Hong, Nho-Kwang Park and Chong Soo Lee "FE Analysis of Microstructure Evolution during Ring Rolling Process of a Large-Scale Ti-6Al-4V Alloy Ring", Materials Science Forum, Vols. 638-642, pp 223-228 (2010)
155 L. J. Park, H. W. Kim, J. D. Yoo, C. S. Lee and K. -T. Park “Tensile Failure of 4130 Steel Having Different Ultrafine Grained Structure",vol 527, pp645-651, (2010)
154 J.-W. Park, Y.-J. Kim, C.H. Park, D.-H. Lee, Y.G. Ko, J.-H. Jang, C.S. Lee “Enhanced osteoblast response to equal channel angular pressing-processed pure titanium substrate with microrough surface topography”, Acta Biomaterialia, Vol. 5, No. 8, pp.3272-3280 (2009)
153 Kyoung Ho So, Ji Soo Kim, Young Soo Chun, Kyung-Tae Park, Young-Kook Lee, Chong Soo Lee “Hydrogen Delayed Fracture Properties and Internal Hydrogen Behavior of a Fe-18Mn-1.5Al-0.6C TWIP Steel”, ISIJ international, Vol. 49, No. 12 pp. 1952-1959 (2009)
152 Jin-Woo Park, Je-Hee Jang, Chong Soo Lee, Takao Hanawa “Osteoconductivity of hydrophilic microstructured titanium implants with phosphate ion chemistry”, Acta Biomaterialia, Vol. 5, No. 6, pp. 2311-2321 (2009)
151 Young Gun Ko, D H Shin, C.S. Lee “Cavitation Damage Incorporating Cavity Growth in Submicrometer Grained Titanium Alloy”, Journal of Materials Research, Vol. 24, No. 6, pp.2161-2165 (2009)
150 Jeoung Han Kim, N.S. Reddy, Jong Taek Yeom, Chong Soo Lee, and Nho-Kwang Park “Microstructure Prediction of Two-phase Titanium Alloy during Hot Forging Using Artificial Neural Networks and FE simulation”, Metals and Materials International, Vol. 15, No. 3, pp. 427-437 (2009)
149 Jong-Taek Yeom, Jeoung Kan Kim, Jae-Keun Hong, Nho-Kwang Park and Chong Soo Lee “Influence of Initial Microstructure on hot workability of Ti-6Al-4V alloy”, International Journal of Modern Physics B, Vol. 23, pp. 808-813 (2009)
148 Seong-Gu Hong, Thak-Sang Byun, Lance L. Snead, Chong Soo Lee “Evaluation methods for the hoop strength of small-sized tubular ceramic components”, Journal of Materials Research, Vol. 24, No. 4, pp.1422-1434 (2009)
147 Ji Soo Kim, You Hwan Lee, Duk Lak Lee, Kyung-Tae Park, Chong Soo Lee “Microstructural influences on hydrogen delayed fracture of high strength steels”, Materials Science and Engineering A, Vol. 505, pp. 105-110 (2009)
146 Sung Hyuk Park, Seong-Gu Hong, Byoung Ho Lee, Chong Soo Lee “Fatigue Life Prediction of Rolled AZ31 Magnesium Alloy Using an Energy-Based Model”, International Journal of Modern Physics B, Vol.22, pp.5503-5508 (2008)
145 Chan Hee Park, Kyung-Tae Park, Dong Hyuk Shin and Chong Soo Lee “Microstructural Mechanisms during Dynamic Globularization of Ti-6Al-4V Alloy” Materials Transaction, Vol. 49, No. 10, pp. 2196-2200 (2008)
144 C.H. Park, Y.G. Ko, J.W. Park and Chong Soo Lee “High Strain Rate Superplasticity Utilizing Dynamic Globularization of ELI Grade Ti-6Al-4V Alloy” Materials Science and Engineering A, Vol.496, pp 2196-2200, (2005)
143 Y.G. Ko, D.H. Shin and C.S. Lee “Factors Influencing the Equal-Channel Angular Pressing of Ti-6Al-4V Alloy Having Lamellar Microstructure”, Materials Science and Engineering A, Vol. 493, pp. 164-169 (2008)
142 Seong-Gu Hong, Minho Kim, Soon-Bok Lee, Chong Soo Lee “Characterization of deformation behaviors and elastic moduli of multilayered films in piezoelectric inkjet head”, Journal of Microelectromechanical Systems, vol. 17, No. 5, pp. 1155-1163. OCTOBER (2008)
141 Jin-Woo Park, Sang-Ryul Bae, Jo-Young Suh, Dong-Hee Lee, Sang-Hyun Kim, Hyungjun Kim, Chong-Soo Lee “Evaluation of bone healing with eggshell-derived bone graft substitutes in rat calvaria A pilot study”, Journal of Biomedical Materials Research Part A, Vol. 87A, issue 1, pp. 203-214 (2008)
140 Hyoungkuk Park, Chong Soo Lee “Quantitative elemental analysis of Fe-Zn-alloy by non-destructive method”, X-Ray Spectrometry, Vol. 37, pp.561-564 (2008)
139 N.S. Reddy, You Hwan Lee, Chan Hee Park, Chong Soo Lee “Prediction of flow stress in Ti-6Al-4V alloy with an equiaxed α + β Microstructure” Materials Science and Engineering A, Vol. 492, pp. 276?282 (2008)
138 Y.G. Ko, C.S. Lee and D.H. Shin “Deformation Characteristics of Sub-microcrystalline Ti-6Al-4V”, Scripta Materialia, Vol. 58, pp. 1094-1097 (2008)
137 J.T. Yeom, E.J. Jung, J.H. Kim, J.-K. Hong, N.-K. Park, S.S. Choi and C.S. Lee “Investigation of Flow Instability in High Temperature Deformation of INCONEL Alloy 783 using Processing Map Approach”, Key Engineering Materials, Vols. 385-387, pp 501-504 (2008)
136 B.H. Lee, W. Bang, S. Ahn and C.S. Lee “The Effects of temperature and Strain Rate on the High Temperature Formability of Strip Cast Mg-3Al-1Zn Alloy”, Metallurgical Transactions A, Vol. 39A, pp. 1426-1434 (2008)
135 J.H. Kim, S.L. Semiatin and C.S. Lee “High-Temperature Deformation and Boundary Characteristics of Titanium Alloys with an Equiaxed Microstructure” Materials Science and Engineering A, Vol. 485 pp. 601-612 (2008)
134 N.S. Reddy, Chan Hee Park, You-Hwan Lee, Chong Soo Lee “Neural Network Modeling of Flow Stress in Ti-6Al-4V Alloy with an Equiaxed and Widmanstatten Microstructure”, Materials Science and Technology, Vol. 24, No. 3, pp. 294-301 (2008)
133 N.S. Reddy, You-Hwan Lee, Jeoung Han Kim, Chong Soo Lee “High Temperature Deformation Behavior of Ti-6Al-4V Alloy with an Equiaxed Microstructure, A Neural Networks Analysis”, Metals and Materials International, Vol. 14, No. 2 pp. 213-221 (2008)
132 M. El Mehtedi, L. Balloni, S. Spigarelli, E. Evangelista, G. Rosen, B.H.Lee, C.S.Lee “Comparative Study of High Temperature Workability of ZM21and AZ31 Magnesium Alloys”, Metallurgical Science and Technology, Vol.25, No. 1 pp.23-30 (2007).
131 Y.G. Ko, D.H. Shin, K.-T. Park and C.S. Lee "Superplastic Deformation Behavior of Ultra Fine Grain 5083 Al Alloy Using Load-Relaxation Tests" Materials Science and Engineering A,Vols.449-451, pp.756-760 (2007)
130 J.T. Yeom, J.H. Kim, N.Y. Kim, N.K. Park and C.S. Lee "Characterization of Dynamic Globularization Behavior during Hot working of Ti-6Al-4V Alloy", Advanced Materials Research, Vols. 26-28, pp. 1033-1036 (2007)
129 K.J. Kim, S.S. Choi, C.Y. Hwang, J.S. Kim, J.T. Yeom, C.S. Lee "Ring-Rolling Process for Manufacturing Ti-6Al-4V Plane and Profiled Ring-Products", Advanced Materials Research, Vols. 26-28, pp429-432 (2007)
128 B.H. Lee, S.H. Park, M.El Mehtedi, E. Evangelista, C.S. Lee "Influence of Initial Texture on Twin Formation and Plastic Deformation of Rolled AZ31 Mg Alloy", Advanced Materials Research, Vols. 26-28, pp. 149-152 (2007)
127 D.Y. Hwang, K. Kwon, D.H. Shin, K.-T. Park, Y.G. Ko and C.S. Lee "Superplastic Behavior of Ultrafine Grained Al Alloys Fabricated by Severe Plastic Deformation", Key Engineering Materials, Vol.345-346, pp.597-600 (2007)
126 J.T. Yeom, E.J. Jung, J.H. Kim, D.-G. Lee, N.K. Park, S.S. Choi and C.S. Lee "Process Design of Profile Ring Rolling for Turbine Diaphragm using FEM Simulation", Key Engineering Materials, Vol. 345-346, pp. 1557-1560 (2007)
125 J.H. Kim, N.S. Reddy, J.T. Yeom, C.S. Lee and N.K. Park "Artificial neural network modeling of phase volume fraction of Ti alloy under isothermal and non-isothermal hot forging conditions", Journal of Mechanical Science and Technology, Vol. 21, No.10, 1560-1565 (2007)
124 J.S. Kim, D.L. Lee, Y.H. Lee and C.S. Lee "The Effect of Intergranular Ferrite on the Hydrogen Delayed Fracture Resistance of High Strength Boron-added Steel", ISIJ Intrenational, Vol.47, No.6, 913-919 (2007)
123 R.-G. Guan, C. Wang, Z.-H. Xing, C. S. Lee and F.-Y. Hu “Novel sloping plate process for semisolid metal forming”, Materials Science and Technology, Vol.23 No.4 pp. 438-443 (2007)
122 J.E. Park, J.B. Jeon, S.L. Semiatin, C.S. Lee and Y.W. Chang "Effect of Texture on High Temperature Deformation Behaviors of Ti-6Al-4V Alloy", Key Engineering Materials, Vol. 340-341, pp.835-840 (2007)
121 J.T. Yeom, C.S. Lee, J.H. Kim, D.-G. Lee and N.K. Park “Continuum Damage Model of Creep-Fatigue Interaction in Ni-base Superalloy”, Key Engineering Materials, Vol. 340-341, pp. 235-240 (2007)
120 J.T. Yeom, N.K. Park, Y.H. Lee, T.J. Shin, S.-M. Hwang, S.S. Hong, I.O. Shim, and C.S. Lee "Improved process design for hot backward extrusion of Ti-6Al-4V tubes using FEM and continuum instability criterion", Proceedings of the Institution of Mechanical Engineers, Vol.221, Part B, Journal of Engineering Manufacture, pp. 255-265(2007)
119 K.-T. Park, E.G. Lee, C.S. Lee “Reverse austenite transformation behavior of equal channel angular pressed low carbon ferrite pearlite steel", ISIJ International, Vol. 47, pp. 294-298 (2007)
118 K.S. Park, S.J. Cho, K.Y. Lee, G.S. Kim and C.S. Lee "Effect of Volume Fraction of Undissolved Cementite on the High Cycle Fatigue Properties of High Carbon Steels", International Journal of Fatigue Vol.29, pp.1863-1867 (2007)
117 N.S. Reddy, You-Hwan Lee, Jeoung Han Kim, Chong Soo Lee “High Temperature Deformation Behavior of Ti-6Al-4V Alloy with an Equiaxed Microstructure A Neural Networks Analysis”, Metals and Materials International, Vol. 14, No. 2 pp. 213-221 (2008)
116 Y.G. Ko, Y.-N. Kown, J.H. Lee, D.H. Shin and C.S. Lee "Cavitation Behavior of Ultra-Fine Grained Ti-6Al-4V Alloy Produced by Equal-Channel Angular Pressing", Materials Science Forum Vols.551-552, pp. 621-626 (2007)
115 J.H. Kim, J.T. Yeom, N.K. Park and C.S. Lee "Constitutive analysis of the high-temperature deformation behavior of single phase α-Ti and α+β Ti-6Al-4V alloy" Materials Science Forum, Vols. 539-543, pp. 3607-3612 (2007)
114 J. S. Kim, Y.H. Lee, Y. -W. Kim, C. S. Lee “High Temperature Deformation Behavior of Beta-Gamma TiAl Alloy”, Materias Science Forum, Vols. 539-543, pp. 1531-1536 (2007)
113 H.S. Lee, J.H. Yoon, C.H. Park, Y.G. Ko, D.H. Shin, C.S. Lee "A study on diffusion bonding of superplastic Ti-6Al-4V ELI grade", Journal of Materials Processing Technology, 187-188 (2007) 526-529
112 B.H. Lee, N.S, Reddy, J.T. Yeom and C.S. Lee "Flow Softening Behavior during High Temperature Deformation of AZ31 Mg Alloy" Journal of Materials Processing Technology, Vols.187-188, pp.766-769 (2007)
111 J.T. Yeom, J.H. Kim, N.K. Park, S.S. Choi and C.S. Lee "Ring-Rolling Design for a Large -Scale Ring Product of Ti-6Al-4V Alloy" Journal of Materials Processing Technology, Vols.187-188, pp.747-751 (2007)
110 K.A. Lee, Y.C. Kim, J.H. Kim, C.S. Lee, J. Namkung and M.C. Kim “Mechanical properties of Fe–Ni–Cr–Si–B bulk glassy alloy” Materials Science and Engineering A, Vols. 449-451, pp. 181-184 (2007)
109 K.S. Park, K.-T. Park, D.L. Lee and C.S. Lee "Effect of Heat Treatment Path on the Cold Formability of Drawn Dual-Phase Steels" Materials Science and Engineering A, Vols. 449-451, pp. 1135-1138 (2007)
108 J.T. Yeom, N.K. Park, Y.H. Lee, T.J. Shin, S.-M. Hwang, S.S. Hong, I.O. Shim, and C.S. Lee "Improved process design for hot backward extrusion of Ti-6Al-4V tubes using FEM and continuum instability criterion", Proceedings of the Institution of Mechanical Engineers, Vol.221, Part B, Journal of Engineering Manufacture, pp. 255-265(2007)
107 K.-T. Park, E.G. Lee, C.S. Lee "Reverse austenite transformation behavior of equal channel angular pressed low carbon ferrite/pearlite steel", ISIJ International, Vol.47, pp.294-298 (2007)
106 N.S. Reddy, C.S. Lee, J.H. Kim, and S.L. Semiatin "Determination of the beta-approach curve and beta-transus temperature for titanium alloys using sensitivity analysis of a trained neural network", Materials Science and Engineering A, Vol. 434, 218-226 (2006)
105 B. H. Lee, W. Bang, S. Ahn and C. S. Lee “High Temperature Deformation Behavior of Strip-Cast AZ31 Mg alloy”, Advanced Materials Research, Vols. 15-17, pp. 461-466 (2006)
104 H.K. Park, J.-H Hong and C.S. Lee “Measurement of Alloying Degree of Galvannealed Steels by X-Ray Diffraction”, Key Engineering Materials, Vols. 321-323, pp. 1461-1464, (2006)
103 Y.H. Lee and C.S. Lee “High Temperature Forming of Ti-6Al-4V Alloy Considering Microstructure Evolution”, Rare Metal Materials and Engineering, Vol. 35, Suppl.1, pp. 29-33 (2006)
102 S.L. Semiatin, M.W. Corbett, P.N. Fagin, G.A. Salishchev, A.K. Ghosh, and C.S. Lee "Dynamic-Coarsening Behavior of an Alpha Beta Titanium Alloy" Metallurgical and Materials Transactions A , Vol. 37A, pp. 1125-1136 (2006)
101 K.-T. Park, C.S.lee, D.H. Shin, Y.S. Lee and W.J. Nam "Reappraisal of Grain Boundary Diffusion Creep Equations for Nanocrystalline Materials", Metals and Materials International, Vol. 12, No. 2, pp. 107-114 (2006)
100 Young Gun Ko, Dong Hyuk Shin, Kyung-Tae Park and Chong Soo Lee “Analysis on the Strain Hardening Behavior of Ultra-Fine Grain Pure Titanium” Scripta Materialia, Vol. 54, pp. 1785-1789 (2006)
99 Y.G. Ko, C.S. Lee, D.H. Shin and S.L. Semiatin “Low Temperature Superplasticity of Ultrafine Grain Ti-6Al-4V Alloy Processed by ECA Pressing”, Metallurgical and Materials Transactions A, vol. 37A, pp. 381-391 (2006)
98 K.-T. Park, C.S. Lee and D.H. Shin “Superplastic Deformation of Ultrafine Grained Al Alloys Processed by ECAP and Post-Rolling”, Materials Science Forum, vol. 503-504, pp. 119-124 (2006)
97 J.T. Yeom, C.S. Lee, C.Y. Eum, J.H. Kim, N.K. Park “FE Simulation of Microstructure Evolution during Direct Age Process of Alloy 718”, Journal of Chinese Society of Mechanical Engineers, Vol. 26, No. 5, pp. 533-538 (2005)
96 J.E. Park, S.L. Semiatin, C.S. Lee and Y.W. Chang “Structural superplasticity of an Al alloy in low strain rate regime?An internal variable approach”, Materials Science and Engineering A, vol. 410-411, pp. 124-129 (2005)
95 Y.G. Ko, W.G. Kim, C.S. Lee and D.H. Shin “Microstructural Influence on Low-temperature Superplasticity of UFG Ti-6Al-4V Alloy”, Materials Science and Engineering A, vol. 410-411, pp. 156-159 (2005)
94 J.S. Park, S.J. Kim, K.H. Kim, S.H. Park and C.S. Lee “A microstructural model for predicting high cycle fatigue life of steels “, International Journal of Fatigue, 27, pp. 1115-1123 (2005)
93 K.S. Park, K.T. Park, D.L. Lee and C.S. Lee “Comparison of Cold Formability of Cold Drawn Non-Heat-Treated Steels having Similar Strength”, ISIJ International, Vol. 45, No. 9, pp. 1352-1357 (2005)
92 Young-Gun Ko, Chong Soo Lee, Dong Hyuk Shin “Nanocrystalline titanium alloy and method and apparatus for manufacturing the same”,Filing date 06/28/2005 (Appl No. 11/169,068)
91 K.-T. Park, C.S. Lee and D.H. Shin “Strain Hardenability of Ultrafine Grained Low Carbon Steels Processed by ECAP”, Reviews on Advanced Materials Science, Vol. 10, pp. 133-137 (2005)
90 T.J. Shin, Y.H. Lee, J.T. Yeom, S.H. Chung, S.S. Hong, I.O. Shim, N.K. Park, C.S. Lee, S.M. Hwang “Process Optimal Design in Non-Isothermal Backward Extrusion of a Titanium Alloy by the Finite Element Method”, Computer Methods in Applied Mechanics and Engineering, Vol. 194, pp. 3838-3869 (2005)
89 Y. Son, Y.K. Lee, C.S. Lee, K.-T. Park and D.H. Shin “UFG Ferrite-Martensite Dual Phase Steels fabricated via ECAP Microstructure and Tensile Properties”, Acta Materialia, Vol. 53, No. 11, pp. 3125-3134 (2005)
88 H.J. Lee, C.S. Lee and Y.W. Chang “Role of Nitrogen on the Cyclic Deformation Behavior of Duplex Stainless Steel”, Metallurgical Transactions A, Vol. 36, No. 4, pp. 967-976 (2005)
87 D.-G. Lee, Y.H. Lee, C.S. Lee and S. Lee “Effects of Volume Fraction of Tempered Martensite on Dynamic Deformation Properties of Ti-6Al-4V Alloy Having Bimodal Microstructure”, Metallurgical Transactions A, Vol. 36A, pp. 741-748 (2005)
86 J.H. Kim, S.L. Semiatin and C.S. Lee “Constitutive Analysis on the High Temperature Deformation Behavior of Ti-6Al-4V and Ti-6.85Al-1.6V alloy”, Materials Science and Engineering A, Vol. 394, pp.366-375 (2005)
85 J.S. Kim, D.H. Shin, Y.W. Chang and C.S. Lee “Constitutive Analysis on Superplastic Deformation Mechanisms of Two-Phase Ti3Al-xNb Intermetallics”, Materials Science and Engineering A, Vol. 394, pp.117-125 (2005)
84 K.-T. Park, H.-J. Lee, C.S. Lee and D.H. Shin “Effect of post-rolling after ECAP on deformation behavior of ECAPed commercial Al-Mg alloy at 723 K”, Materials Science and Engineering A, A393/1-2, pp.118-124 (2005)
83 W. Bang, J.E. Park, Y.N. Kwon, C.S. Lee and Y.W. Chang “On the low strain rate regime of structural superplasticity- an internal variable approach”, Materials Science Forum, Vols. 475-479, pp. 3007-3012 (2005)
82 K.-T. Park, C.S. Lee and D.H. Shin “Superplastic Behavior of As-Equal Channel Angular Pressed 5083 Al and 5083 Al-0.2Sc Alloys”, Materials Science Forum, Vols. 475-479, pp. 2937-2940 (2005)
81 B.H. Lee, K.S. Shin and C.S. Lee “High Temperature Deformation Behavior of AZ31 Mg Alloy”, Materials Science Forum, Vols. 475-479, pp. 2927-2930 (2005)
80 J.H. Kim, S.L. Semiatin, and C.S. Lee “Deformation Behavior of Ti-6Al-4V and Ti-6.85-1.6V Alloy with a Globular Microstructure”, Materials Science Forum, Vols. 475-479, pp. 2965-2968 (2005)
79 Y. G. Ko, J.H. Kim, C. S. Lee, D. H. Shin and S.L. Semiatin “Load Relaxation Behavior of Ultra-fine Grained Ti-6Al-4V Alloy”, Materials Science Forum, Vols. 475-479, pp. 2955-2960 (2005)
78 S.L. Semiatin, PP.A. Kobryn, O.M. Ivasishin, H. Zhuk, W.T. Wu, and C.S. Lee “The Role OF Modeling in the Development of Advanced Processes for Metallic Aerospace Alloys”, Metals and Materials International, Vol. 10, No. 6, pp. 589-603 (2004)
77 Y.H. Lee, C.S. Lee, T.J. Shin, S.M. Hwang, I.O. Shim “High Temperature Forming of Ti-6Al-4V Alloy Considering Microstructural Evolution”, Key Engineering Materials, Vol. 274-276, pp. 117-122 (2004)
76 D.-G. Lee, Y. H. Lee, S. Lee, C.S. Lee and S. Hur “Dynamic Deformation behavior and Ballistic Impact Properties of Ti-6Al-4V Alloy Having Equiaxed and Bimodal Microstructures”, Metallurgical Transactions, Vol. 35A, pp. 3103-3112 (2004)
75 K.-T. Park, H.-J. Lee, C.S. Lee, W.J. Nam and D.H. Shin “Enhancement of High Strain Rate Superplastic Elongation of a Modified 5154 Al by Subsequent Rolling after Equal Channel Angular Pressing”, Scripta Materialia, Vol. 51, pp 479-483 (2004)
74 H.J. Kim, C.S. Lee, S.H. Park and D.H. Shin “Quantitative Analysis on Low Cycle Fatigue Damage A Microstructural Model for the Prediction of Fatigue Life”, Materials Science and Engineering A, Vol. 379, pp 210-217 (2004)
73 K.-T. Park, H.-J. Lee, C.S. Lee, B.D. Ahn, H.S. Cho and D.H. Shin “Effect of ECAP Strain on Deformation Behavior at Low Temperature Superplastic Regime of Ultrafine Grained 5083 Al Alloy Fabricated by ECAP”, Materials Transactions, Vol. 45, No. 3, pp. 958-963 (2004)
72 K.A. Lee, Y.W. Chang and C.S. Lee “An Internal Variable Approach for Anomalous Yield Phenomena of β-CuZn Alloy”, Acta Materialia, Vol 52, No. 10, pp. 2913-2922 (2004)
71 K.A. Lee, Y.W. Chang and C. S. Lee “The Yield Stress Anomalous Behavior in Beta-CuZn Alloy”, Materials Science Forum, Vol. 449-452, pp. 841-844 (2004)
70 Y.H. Lee, T.J. Shin, J.T. Yeom, N.K. Park, S.S. Hong, I.O. Shim, S.M. Hwang and C.S. Lee “Prediction of Microstructure during High temperature Forming of Ti-6Al-4V alloy”, Materials Science Forum, Vol. 449-452, pp. 189-192 (2004)
69 D.-G. Lee, Y. H. Lee, S. Lee, C.S. Lee, J-H Choi and S. Hur “Ultra high-speed Exploding Properties of Ti-6Al-4V Alloy Having Equiaxed and Bimodal Microstructures”, Metallurgical Transactions A, Vol. 35A, pp. 719-724 (2004)
68 K.-T. Park, S-H. Myung, D.H. Shin and C.S. Lee “Size and Distribution of Particles and Voids Pre-existing ECApressed 5083 Al Alloy”, Materials Science and Engineering A, Vol. A371, pp. 178-186 (2004)
67 S.M. Kim, J. Kim, D.H. Shin, Y.G. Ko, C.S. Lee and S.L. Semiatin “Microstructure Development and Segment Formation during ECA pressing of Ti-6Al-4V Alloy”, Scripta Materialia, Vol. 50, pp. 927-930 (2004)
66 D.-G. Lee, S. Lee, C.S. Lee “Quasi-Static and Dynamic Deformation Behavior of Ti-6Al-4V Alloy Containing Fine 2-Ti3Al Precipitates”, Materials Science and Engineering A, Vol. A366, pp. 25-37 (2004)
65 D.-G. Lee, S. Lee, C.S. Lee and S. Hur “Effect of Microstructural Factors on Quasi-static and Dynamic Deformation Behavior of Ti-6Al-4V Alloys with Widmanstatten Structures”, Metallurgical Transactions A, Vol. 34A, pp. 2541-2548 (2003)
64 J.H. Kim, T.K. Ha, Y.W. Chang and C.S. Lee “High Temperature Deformation Behavior of Gamma TiAl Alloy-Microstructural Evolution and Mechanisms”, Metallurgical Transactions A, 34A, pp. 2165-2176 (2003)
63 Byeong-Joo Lee, Chong Soo Lee, Jae Chul Lee “Stress induced crystallization of amorphous materials and mechanical properties of nanocrystalline materials, a molecular dynamics simulation study”, Acta Materialia, Vol. 51, No. 20, pp. 6233-6240 (2003)
62 J.H. Kim, S.L. Semiatin and C.S. Lee “Constitutive Analysis of the High Temperature Deformation of Ti-6Al-4V Alloy with Transformed Microstructures”, Acta Materialia, Vol. 51, No. 18, pp 5613-5626 (2003)
61 S.H. Kim, H.K. Moon, T.W. Kang and C.S. Lee “Dissolution Kinetics of Delta Ferrite in AISI 304 Stainless Steel Produced by Strip Casting Process”, Materials Science and Engineering A, Vol. A356, pp. 390-398 (2003)
60 N.K. Park, J.T. Yeom, Y.S. Na, C.S. Lee, I.O. Shim, S.S. Hong “Deformation Behavior and Microstructure Evolutions in Ti-6Al-4V Extrusion”, Materials Science Forum, Vol. 426-432 pp. 719-724 (2003)
59 J. H. Kim, S.L. Semiatin and C. S. Lee “High Temperature Deformation Behavior of Ti-6Al-4V alloy Widmanstätten Microstructure”, Materials Science Forum, Vol. 426-432 pp. 689-694 (2003)
58 W. Bang, C.S. Lee and Y.W. Chang “Finite Element Analysis of Hot Forging with Flow Softening by Dynamic Recrystallization”, Journal of Materials Processing Technology, Vol. 134, pp. 153-158 (2003)
57 H.C. Jung, C.D. Yim, W.W. Park, C.S. Lee and K.S. Shin “Fatigue Crack Propagation Behavior of AZ91D Magnesium Alloy”, Materials Science Forum, Vol. 419-422, pp. 75-80 (2003)
56 56. Y.G. Ko, W.S. Jung, D.H. Shin and C.S. Lee “Effects of Pressing Temperature and Initial Microstructure on the Equal Channel Angular Pressing of Ti-6Al-4V Alloy”, Scripta Materialia, Vol. 48, pp. 197-202 (2003)
55 Y.G. Ko, Y.H. Lee, W.S. Jung and C.S. Lee “Effects of Pressing Temperature and Initial Microstructure on the Equal Channel Angular Pressing of Ti-6Al-4V Alloy”, Key Engineering Materials, Vol. 233-236, pp. 579-584 (2003)
54 J.H. Kim, D.H. Shin, S.L. Semiatin and C.S. Lee “High Temperature Deformation Behavior of Gamma TiAl Alloy Determined using Load Relaxation Technique”, Materials Science and Engineering A, A344, No.1-1, pp146-157, (2003)
53 J. Kim, I. Kim, D.H. Shin, C.S. Lee and S.K. Hwang “Effects of ECA Pressing Temperature on Deformation Structures of Pure Ti” , Materials Science and Engineering A, A342 pp. 302-310 (2003)
52 T.S. Yoon, Y.H. Lee, J.H. Lee, S.H. Ahn and C.S. Lee “Effects of Sintering Conditions on the Mechanical Properties of metal Injection Molded 316L Stainless Steel”, ISIJ International, Vol. 43, No.1, pp. 119-126, (2003)
51 Chul Min Bae, Chong Soo Lee and Won Jong Nam “Effect of Carbon Content on Mechanical Properties of Fully Pearlitic Steels”, Materials Science and Technology, Vol. 18, pp. 1317-1321 (2002)
50 Won Jong Nam, Chul Min Bae and Chong Soo Lee “Effect of Carbon Content on the Hall-Petch Parameter in Cold Drawn Pearlitic Steel Wires”, J. of Materials Science, Vol. 37, pp. 2243-2249 (2002)
49 J.S. Park, S.H. Park and C.S. Lee “A Microstructural Model for the Prediction of High Cycle Fatigue Life”, Scripta Materialia, Vol. 47, No. 4, pp. 225-229 (2002)
48 C. Choi, H.J. Kim, and C.S. Lee “Effect of Lamellar Structure on the Fatigue Crack Propagation of *-TiAl Alloys with Fully Lamellar Microstructure”, Materials Science and Engineering A, 329-331C pp. 542-553 (2002)
47 T.A. Venkatesh, B.PP. Conner, C.S. Lee “An Experimental Investigation of Fretting Fatigue in Ti-6Al-4V The Role of Contact Conditions and Microstructure” Metallurgical Transactions A, Vol. 32A, pp 1131-1146, (2001)
46 Dong-geon Lee, Sangho Kim, Sunghak Lee, and Chong Soo Lee “Effect of Microstructural Morphology on Quasi-static and Dynamic Deformation Behavior of Ti-6Al-4V Alloy”, Metallurgical Transactions A, 32A, pp. 315-324 (2001)
45 Joon Sik Park, Sung Joon Kim and Chong Soo Lee “Effect of W Addition on the Low Cycle Fatigue Behavior of High Cr Ferritic Steels”, Materials Science and Engineering A, A298/1-2, pp. 127-136 (2001)
44 C.M. Bae, W.J. Nam and C.S. Lee “Effects of Microstructural Parameters on Work Hardening of Pearlite at Small Strains”, Metallurgical Transactions A, Vol. 31A, pp. 2665-2669 (2000)
43 Won Jong Nam, Chong Soo Lee and Deok Young Ban “Effects of Alloy Additions and Tempering Temperature on the Sag Resistance of Si-Cr Spring Steels”, Materials Science and Engineering A, A289 pp. 8-17, (2000)
42 C.S. Lee, S.B. Lee, J.S. Kim and Y.W. Chang “Mechanical and Microstructural Analysis on the Superplastic Deformation Behavior of Ti-6Al-4V Alloy”, International Journal of Mechanical Sciences, Vol. 42, pp. 1555-1569 (2000)
41 Joon Sik Park, Kee Ahn Lee and Chong Soo Lee “Effect of W-addition on Low Cycle Fatigue Behavior of High Cr Ferritic Steels”, Metals and Materials, Vol. 5. No. 6, pp. 559-562 (1999)
40 C. M. Bae, C. S. Lee and W. J. Nam “Effect of Microstructural Features on Ductility in Hypo-eutectoid Steels”, Scripta Metallurgica et Materialia, Vol. 41, No. 6, pp. 605-610 (1999)
39 D.H. Shin, Y.J. Joo, C.S. Lee and K.T. Park “Grain Elongation in a Superplastic 7075 Al Alloy”, Scripta Materialia, Vol. 41, No. 3, pp. 269-274 (1999)
38 C.S. Lee, J.H. Huh, D.M. Li and D.H. Shin “Acoustic Emission Behavior during Tensile Tests of Low Carbon Steel Welds”, ISIJ International, Vol. 39, No. 4, pp. 365-370 (1999)
37 J.S. Kim, J.H. Kim, and C.S. Lee “Microstructural Analysis on Boundary Sliding and Its Accommodation Mode during Superplastic Deformation of Two-Phase Ti-6Al-4V Alloy”, Materials Science and Engineering A, Vol. A263, pp. 272-280 (1999)
36 C.S. Lee, J.S. Kim, C. Choi and Y.T. Lee “Research Progress of Advanced Titanium Alloys in Korea”, Advanced Performance Materials, Vol. 5, No. 4, pp. 331-340 (1998)
35 D.M. Li , W.J. Nam and C.S. Lee “Prediction of Fatigue Crack Growth from Low Cycle Fatigue Data for a High Strength Spring Steel”, Engineering Fracture Mechanics, Vol. 60, No. 4, pp. 397-406 (1998)
34 J.S. Kim, W.J. Nam and Chong Soo Lee “Effect of Volume Fraction on the Dynamic Grain Growth during Superplastic Deformation of Ti3Al-based Alloys”, Metals and Materials, Vol.4, No. 5, pp. 1041-1046 (1998)
33 Won Jong Nam and Chong Soo Lee “Microstructural Influence on the Sag Resistance of Cr-Containing and Cr-Free Spring Steels”, Materials Science and Technology, Vol. 14, No. 8, pp. 827-831 (1998)
32 K.A. Lee and C.S. Lee “The Effect of Strain Rate on the Anomalous Peak in Yield Stress of -CuZn Alloy”, Scripta Metallurgica et Materialia, Vol. 39, No. 9 pp. 1289-1294 (1998)
31 T.H. Kang, D.M. Li, Y.D. Lee and C.S. Lee “Alloying and Aging Effects on the Fatigue Crack Growth of Duplex Stainless Steels”, Materials Science and Engineering A, Vol. 251, No. 1 / 2, pp. 192-199, (1998)
30 J.S. Kim, Y.W. Chang and C.S. Lee “Mechanical and Microstructural Analysis on the Superplastic Deformation Behavior of Two-Phase Ti-6Al-4V Alloy”, Metals and Materials, Vol. 4, No. 4, pp. 771-777, (1998)
29 D.H. Shin, Y.J. Joo, W.J. Kim and C.S. Lee “Microstructural Evolution during the Superplastic Deformation of a 7475 Al Alloy”, Journal of Materials Science, Vol. 33, pp. 3073-3078 (1998)
28 J.S. Kim, D.M. Li and C.S. Lee “Alloying Effects on the Superplastic Behavior of Ti-Fe-Al-Ni Alloys”, Materials Science and Technology, Vol. 14, pp. 676-682 (1998)
27 J.H. Lee, Y.J. Song, D.H. Shin and C.S. Lee “Microstructural Evolution during Superplastic Bulge Forming of Ti-6Al-4V Alloy”, Materials Science and Engineering A, Vol. A243, pp. 119-125 (1998)
26 D.M. Li , W.J. Nam and C.S. Lee “Strain Energy-Based approaches to Low Cycle Fatigue Damage Mechanism in a High Strength Spring Steel”, Metallurgical Transactions A. Vol. 29A, pp. 1431-1439 (1998)
25 J.S. Kim, Y.W. Chang and C.S. Lee “Quantitative Analysis on Boundary Sliding and Its Accommodation Mode during Superplastic Deformation of Two-Phase Ti-6Al-4V Alloy”, Metallurgical Transactions A, Vol. 29A, pp. 217-226 (1998)
24 C.S. Lee, K.A. Lee, D.M. Li, S.J. Yoo and W.J. Nam “Microstructural Influence on the Fatigue Properties of a High Strength Spring Steel”, Materials Science and Engineering A, Vol. A241, pp. 30-37 (1998)
23 J.H. Huh, K.A. Lee and C.S. Lee “Acoustic Emission Behavior during the Deformation of Welded Steel Joints”, Journal of Acoustic Emission, Vol. 15, No. 1-4, pp. S80-S88 (1997)
22 H.H. Jung, C.S. Lee, Nack J. Kim “Effects of Morphology and Volume Fraction of α2 Phase on the Fatigue Crack Propagation of a Ti-24Al-11Nb Alloy”, Metallurgical Transactions A, Vol. 28A, pp. 2527-2536 (1997)
21 D.M. Li, K.W. Kim and C.S. Lee “Low Cycle Fatigue Data Evaluation for a High-Strength Steel”, International Journal of Fatigue, Vol. 19, No. 8-9, pp. 607-612 (1997)
20 C.S. Lee, H.S. Shin and D.M. Li “Effect of W Addition and Heat-Treatment on Corrosion Fatigue Crack Growth behavior of Duplex Stainless Steels”, ISIJ International, Vol. 37, No. 11, pp. 1146-1152 (1997)
19 D.H. Shin, C.S. Lee and W.J. Kim “Superplasticity of Fine-grained 7475 Al Alloys and a proposed New Deformation Mechanism”, Acta Metallurgica et Materialia, Vol. 45, No. 12, pp. 5195-5202 (1997)
18 Kee Ahn Lee and Chong Soo Lee “Acoustic Emission Characteristics Associated with Microstructures and Plate Orientations of an Al-Li 8090 Alloys”, Materials Science and Engineering A, Vol. A229, pp. 219-227 (1997).
17 Chong Soo Lee, Ki Jong Park, Daoming Li and Nack Joon Kim “Effects of Temperature on the Fatigue Crack Growth of an Al-Li8090 Alloy with δ' Microstructure”, Metallurgical Transactions A, Vol. 28A, pp. 1089-1093 (1997)
16 W.J. Nam, C.S. Lee and D.Y. Ban “Improvement of Sag Resistance by the Addition of W in Si-Cr-Mo-V Steels”, Scripta Metallurgica et Materialia, Vol. 36, No. 11, pp. 1315-1320 (1997)
15 C. Choi, Y.T. Lee and C.S. Lee “Microstructural Influence on the Fatigue Crack Propagation of a Gamma-TiAl Alloy”, Scripta Metallurgica et Materialia, Vol. 36, No. 7, pp. 821-827 (1997)
14 H.C. Jung, C.S. Lee and C.G. Park “Dislocation Structure Associated with Deformation Behavior of Fe3Al Alloys”, Scripta Metallurgica et Materialia, Vol. 35, No. 9, pp. 1041-1046 (1996)
13 C.M. Bae, W.J. Nam and C.S. Lee “Effect of Interlamellar Spacing on the Delamination of Pearlitic Steel Wires”, Scripta Metallurgica et Materialia, Vol. 35, No. 5, pp. 641-646 (1996)
12 T.K. Ha, C.S. Lee and Y.W. Chang “Plastic Equation of State and Load Relaxation Behavior of Pure Tin”, Scripta Metallurgica et Materialia, Vol. 35, No. 5, pp. 635-640 (1996)
11 C.S. Lee, C.G. Park and Y.W. Chang “Precise Determination of Fatigue Crack Closure in Al Alloys”, Materials Science and Engineering A, Vol. 216, No. 1-2, pp. 131-138 (1996)
10 Ki-Jong Park and Chong Soo Lee “Fatigue Crack propagation in Al-Li 8090 Alloy at Room and Cryogenic Temperatures”, Scripta Metallurgica et Materialia, Vol. 34, No. 2, pp. 215-220 (1996)
9 K.J. Hong, H.D. Jeong and C.S. Lee “Acoustic Emission Behavior during Plastic Deformation of 8090 Al-Li Alloy”, Journal of Acoustic Emission, Vol. 13, No. 3/4, pp. S61-S67 (1995)
8 Y.M. Rhyme, E.J. Lee, Y.W. Chang and C.S. Lee “Effects of Microstructure and Specimen Thickness on the Fatigue Crack Closure in Al-Li 8090 Alloy”, Scripta Metallurgica et Materialia, Vol. 32, No. 8, pp. 1119-1124 (1995)
7 C.S. Lee, Y.M. Rhyme, D.I. Kwon, K.Ono “Acoustic Emission Measurement of Fatigue Crack Closure in Al-Li 8090 Alloy”, Scripta Metallurgica et Materialia, Vol. 32, No. 5, pp. 701-706 (1995)
6 K.J. Park, C.G. Park, N.J. Kim and C.S. Lee “Microstructural Influence on the Intrinsic Fatigue Properties of Al-Li 8090 Alloy” Materials Science and Engineering A, Vol. 190, pp. 99-108 (1995)
5 W.W. Gerberich, S.-H. Chen, Chong Soo Lee and T. Livne “Brittle Fracture Weakest Link or Process Zone Control?”, Metallurgical Transactions A, 18A, pp. 1861-1875 (1987)
4 W.W. Gerberich, D.L. Davidson, X.F. Chen and Chong Soo Lee “Dislocation Dynamics of Crack-Tip Processes Frequency Observations and Theoretical Modeling”, Engineering Fracture Mechanics, 28, pp. 505-518 (1987)
3 Chong Soo Lee, T. Livne and W.W. Gerberich “The Acoustic Emission Measurement of Cleavage Initiation near the Ductile Brittle Transition Temperature in Steel”, Scripta Metallurgica, 20, pp. 1137-1140 (1986)
2 M. Kaczorowski, Chong Soo Lee and W.W. Gerberich “Dislocation Distributions Associated with Fatigue Cracking on Cleavage Planes”, Materials Science and Engineering A, 81, pp. 305-315 (1986)
1 Chong Soo Lee and H. Margolin “Deformation of a Burgers Oriented Bimetallic Bicrystal of *-Ti/* -Ti-13Mn”, Metallurgical Transactions A, 17A, pp. 451-460 (1986)