116 |
Chong Soo Lee* and Taekyung Lee |
“Multi-Pass Caliber-Rolling Process To Fabricate UFG Bulk Ti AlloyWith Superior Performances”, THERMEC 2013 (Keynote presentation), Las Vegas, USA, Dec. 2-6, 2013 |
|
115 |
Sun Mi Kim, Kwang Tae Kim, Ji Soo Kim, Yoon-Uk Heo and Chong Soo Lee* |
“Effect of Alloy Addition on the Corrosion Resistance and Mechanical Properties of 27Cr-7Ni Hyper Duplex Stainless Steels”, IUMRS |
|
114 |
Yongmoon Lee, Byeonggab Lee, Dong Jun Lee, Jiwon Jung, Snag Ho Oh, Hyoung Seop Kim, Chong Soo Lee |
“Effects of pore characteristics on the mechanical properties of porous commercial pure titanium”, PR |
|
113 |
Jae Hyung Kim, Jeong Hun Lee, Chong Soo Lee |
“Microstructural Influence on Very High-cycle Fatigue Properties of Bearing Steel”, PRICM-8, Waikoloa, Hawaii, USA, August 4-9, 2013 |
|
112 |
Chong Soo Lee, Taekyung Lee, Jae Hyung Kim, Chan Hee Park |
“Fabrication of Ultrafine-Grained Ti-6Al-4V Sheet and Its Mechanical Characteristics” (Invited presentation) |
|
111 |
Lee Semiatin and Chong Soo Lee |
“Material-Behavior Models for the Thermomechanical Processing of Aerospace Alloys” (Keynote presentation) |
|
110 |
Qianying Guo, Young Soo Chun, Jeong Hun Lee, Yoon-Uk Heo, Chong Soo Lee |
“Effect of Prestrain on Low-cycle Fatigue Performance of High Manganese Austenitic TWIP Steel”, The 23rd International Ocean (O |
|
109 |
Jong Woo Won and Chong Soo Lee |
“Static Recrystallization of High-Purity Titanium Pre-deformed along Different Loading Directions”, 5th International Conference on Recrystallization and Grain Growth, |
|
108 |
Jeong Hun Lee, Chan Hee Park, Seok Won Song, Chong Soo Lee |
“The effect of loading direction on dynamic recrystallization of pre-twinned AZ31 Mg alloy”, 5th International Conference on Recrystallizati |
|
107 |
Byounggab Lee, Yongmoon Lee, Dong Jun Lee, Jiwon Jung, Sang Ho Oh, Hyoung Seop Kim, Chong Soo Lee |
“Mechanical properties of human bone mimetic hybridized titanium structures”, Hybrid Materials 2013, |
|
106 |
Chong Soo Lee, Young Soo Chun, Junmo Lee, Taekyung Lee |
“Effect of microstructural parameters on hydrogen embrittlement of twinning-induced plasticity steels” (Invited presentation), Beijing, China, |
|
105 |
Jingwei Zhao, Zhengyi Jiang, Dongbin Wei and Chong Soo Lee |
“Process Design Strategies for Producing Heavy Section Steel with Improved Quality”, Beihai, China, ICAMMP 2012, December 22-23, 2012 |
|
104 |
Taekyung Lee, Chan Hee Park, and Chong Soo Lee |
“Ultrafine-Grained Ti-13Nb-13Zr Rod for Biomedical Applications”, BEXCO, Busan, Korea, IUMRS-ICA 2012, August 26-31, 2012 |
|
103 |
Jeong Hun Lee, Sung Hyuk Park, Seong-Gu Hong, Kyung-Tae Park, Chong Soo Lee |
Influence of {10-12} extension twin on the corrosion and electrochemical behavior of rolled AZ31 magnesium alloy”, Vancouv |
|
102 |
Young Soo Chun, Junmo Lee, You-Hwan Lee, Kyung-Tae Park, Chong Soo Lee |
“Mechanical Anisotropy and Texture in Caliber Rolled Twinning-induced Plasticity Steels” , Orlando, Florida, 141st TMS Annual Me |
|
101 |
Byounggab Lee, Jae Hyung Kim, Hyoung Seop Kim and Chong Soo Lee, |
"Mechanical Properties of a Porous Titanium Structure Consisting of Two Different Porosities" Brisbane, Australia, Powder processing, |
|
100 |
Chan Hee Park, Chong Soo Lee |
"Microstructure evolution during controlled dynamic globularization of Ti-6Al-4V" Ohio, USA, MS&T 2011, October 16-20,2011 |
|
99 |
Lee Samiatin, Chan Hee Park, Chong Soo Lee |
"Models for microstructure evolution during TMP of alpha/beta titanium alloys" Ohio, USA, MS&T 2011, October 16-20,2011 |
|
98 |
J.H. Lee, S.H. Park, S.G. Hong, C.S. Lee |
“The effect of annealing on the deformation behavior of rolled AZ31 Mg alloys with {10-12} twins”, ASMA4, Busan, Korea, Oct. 2-4 (2011) |
|
97 |
S.M. Kim, Y.S. Chun, S.Y. Won, Y.H. Kim, C.S. Lee |
"Effect of passivity on the hydrogen embrittlement of ferritic stainless steels" Krakow, Poland, International Symposium on Environmental Damage unde |
|
96 |
Chong Soo Lee, Chan Hee Park, Kyung-Tae Park, S.L.Semiatin |
"Dynamic and static globularization behavior of two-phase Ti alloys" Quebec, Canada, THERMEC`2011, August 1-5,2011 |
|
95 |
Sun Mi KIM, Kwang Tae KIM, Ji Soo KIM, Chong Soo LEE |
"Effect of REM on the Precipitation of Intermetallic Phases in Duplex Stainless Steels" NTU, Sigapore, Joint Symposium on Materials Scienc and Eng |
|
94 |
Jong Woo Won, Chan Hee Park, Dong Geun Lee, Yong Tae Lee and Chong Soo Lee * |
”Flow behavior of commercial pure titanium considering interstitial elements” the 12th world conference on Titanium, Beiji |
|
93 |
J.H. Lee, S.H. Park, H.S. Kwon, G.S. Kim, C.S. Lee |
“Effect of welding methods on the low-cycle fatigue properties of welded DP780 steels”, ICM11, Como, Italy, June. 5-9 (2011) |
|
92 |
Young Soo Chun, Ji Soo Kim, You-Hwan Lee, Duk Lak Lee, Kyung-Tae Park, Chong Soo Lee |
"Hydrogen delayed fracture behavior of caliber rolled high Mn steels" Lake Como, Italy, The 11th international con |
|
91 |
C.S.Lee, Y.S.Chun, J.S.Kim, K.G.Chin, K-T Park, Y-K Lee |
"Effect of aluminum composition on hydrogen delayed fracture of TWIP steels" Seoul, Korea, The First International Conference on High Manganese |
|
90 |
Jingwei Zhao, Young Soo Chun, Chong Soo Lee |
"Hydrogen Embrittlement of Low Carbon HSLA Steel during Slow Strain Rate Test" Guilin, China, 2nd International Conference on Manufacturing Science and Eng |
|
89 |
Byounggab Lee, Chan Hee Park and Chong Soo Lee |
"Effect of porosity on the high cycle fatigue properties of porous titanium alloys" Strassbourg, France, Hybrid Materials 2011, 6-10 march 2011 |
|
88 |
S.M.Kim, K.T.Kim, J.S.Kim, I.D.Choi, Nack.J Kim, C.S.Lee |
“Effect of Ce on Precipitation Behavior and Toughness of Super Duplex Stainless Steel” Beaune, France, Duplex stainless steels 2010 Conference |
|
87 |
Y.S. Chun, J.S. Kim, Y.-K. Lee, K.-T. Park, C.S. Lee |
“The effect of annealing temperature on hydrogen degradation of TWIP steels”, Proceedings of Asia Steel International Conference 2009, pp. 1-7 (20 |
|
86 |
Sung Hyuk Park, Seong-Gu Hong, Byoung Ho Lee, Chong Soo Lee |
“Enhancing in-plane fatigue resistance of rolled AZ31 magnesium alloy by pre-straining”, Magnesium Technology, 2009 TMS Annual Meeting, pp. |
|
85 |
Chong Soo Lee and Jong-Taek Yeom |
“Manufacturing Technology of a Large-Scale Titanium Seamless Ring Using Ring Rolling Process”, 2008 Asian Forum on Light Metals, p. 33, Jeju, Korea, Nov. 4-7 (2008) |
|
84 |
Kook Joo Kim, Hi Sang Jang, Chang Yull Hwang, Seung Sik Choi, Jong Taek Yeom and Chong Soo Lee |
“Manufacturing Technology for Profile Ring-Rolling Process of a Large-Scale Ring Product”, Proceedings ( |
|
83 |
Byoung Ho Lee, Sung Hyuk Park, Wonkyu Bang, Chong Soo Lee |
“Influence of Initial Texture on the Twin Formation and Plastic Deformation of Mg-3Al-1Zn Alloy”, The 9th International Conference on Technol |
|
82 |
T.J. Shin, Y.H. Lee, C.S. Lee, and S.M. Hwang |
“Optimal Design in Non-Isothermal Backward Extrusion by the Finite Element Method”, Mechanics and Mechanisms of Finite Deformation, (ISBN |
|
81 |
Jong Taek Yeom, Jeoung Han Kim, Nho-Kwang Park, Kyung Tae Park, and Chong Soo Lee |
“Constitutive Modeling on High Temperature Deformation Behavior of Ti-6Al-4V Alloy Considering Microstructural Evolut |
|
80 |
C.H. Park, K.-T. Park, D.H. Shin, C.S. Lee |
“Microstructural Mechanisms during Dynmic Globularization of Ti-6Al-4V Alloy.”, 2007 Asian Forum on Light Metals & Exhibition, p. A-session 8-1-7, Dec.5, Ka |
|
79 |
C.H. Park, Y.G. Ko, K.-T. Park, D.H. Shin, C.S. Lee |
“Superplastic Behavior of Ti-6Al-4V Alloy after Dyanmic Globularization”, the 11th world conference on Titanium, Kyoto, Japan, 3-7 June, 2007, Vol. |
|
78 |
Y.H. Lee, C.S. Lee |
“High Temperature Forming of Ti-6Al-4V Alloy Considering Microstructure Evolution”, 11th world conference on Titanium, Kyoto, Japan, 3-7 June, 2007. Vol. 2, pp.1103-1106 (2007). |
|
77 |
J.T. Yeom, C.S. Lee, J.H. Kim, D.G. Lee, N.K. Park |
“FEM Simulation of Microstructure Evolution during Hot Forging Process of a Small-Scale Titanium Alloy Wing-Panel”, 11th world conference on Titaniu |
|
76 |
Jong Taek Yeom, Chong Soo Lee, Jeoung Han Kim, Dong-Geun Lee, Nho Kwang Park |
“Continuum Damage Model of Creep- Fatigue Interaction in Ni-base Superalloy”, AEPA 2006, Nagoya University, Nagoya, Japan, |
|
75 |
Y.G. Ko, Y.-N. Kwon, J.H. Lee, D.H. Shin and C.S. Lee |
“Cavitation behavior of ultrafine grain Ti-6Al-4V alloy produced by severe plastic deformation” ICSAM-2006 (The 9th International Conference on S |
|
74 |
C.H. Park, Y.G. Ko, C.S. Lee, K.-T. Park, D.H. Shin and H.S. Lee |
“High-temperature deformation behavior of ELI Ti-6Al-4V alloy with martensite microstructure” (invited), ICSAM-2006 (The 9th Internati |
|
73 |
K.S. Park, S.J. Cho, K.Y. Lee, G.S. Kim, C.S. Lee |
"Effect of volume fraction of undissolved cementite on the high cycle fatigue properties of high carbon steels", International Conference on Fatigue |
|
72 |
Kyong Su Park, Soo Jeong Cho, Kyoo Young Lee, Gyo Sung Kim and Chong Soo Lee |
"Effect of Undissolved Cementite on the High Cycle Fatigue of High Strength Steel", The 3rd International Conference on Ad |
|
71 |
K.S. Park, S.J. Cho, K. Lee, G.S. Kim and C.S. Lee |
"Effect of undissolved cementite on the high cycle fatigue of high strength steel", Joint Symposium on Materials Science and Engineering for the 21s |
|
70 |
J.H. Kim, J.T. Yeom, N.K. Park and C.S. Lee |
“Constitutive analysis of the high-temperature deformation behavior of single phase -Ti and + Ti-6Al-4V alloy” THERMEC 2006, Vancouver, Canada, 4~8 July |
|
69 |
J. S. Kim, Y.H. Lee, Y. -W. Kim, C. S. Lee |
“High Temperature Deformation Behavior of Beta-Gamma TiAl Alloy”, THERMEC 2006, Vancouver, Canada, 4~8 July (2006) |
|
68 |
B. H. Lee, W. Bang, S. Ahn, C. S. Lee |
“High temperature deformation behavior of Strip-Cast AZ31 Mg alloy”, THERMEC 2006, Vancouver, Canada, 4~8 July (2006) |
|
67 |
H.S. Lee, J.H. Yoon, C.H. Park, Y.G. Ko, D.H. Shin and C.S. Lee |
“A study on diffusion bonding of superplastic Ti-6Al-4V ELI grade” AFDM 2006 (The Third International Conference on Advanced Forming an |
|
66 |
Byoung Ho Lee, N. S. Reddy, Jong Taek Yeom, Chong Soo Lee |
“Flow softening behavior during high temperature deformation of AZ31 Mg alloy”, AFDM 2006 (The Third International Conference on Advanced For |
|
65 |
J.T Yeom, J.H.Kom, N.K.Park , S.S Choi, C.S Lee |
“Ring-Rolling Design for a Large-Scale Ring Product of Ti-6Al-4V alloy”, AFDM 2006 (The Third International Conference on Advanced Forming and Die Man |
|
64 |
Kyong Su Park, Soo Jeong Cho, Kyoo Young Lee, Gyo Sung Kim and Chong Soo Lee |
“Effect of Undissolved Cementite on the High Cycle fatigue of High Strength Steel”, Proceedings of the 3rd International C |
|
63 |
Y.G. Ko, D.H. Shin and C.S. Lee |
“Microstructure Evolution and Mechanical Properties of Ultrafine Grain Pure-Ti”, Ultrafine Grained Materials IV, Edited by Y.T. Zhu, T.G. Langdon, Z. Horita, M.J. Zehe |
|
62 |
J.T. Yeom, C.S. Lee, C.Y. Eum, J.H. Kim and N.K. Park |
“FE Simulation of Microstructure Evolution During Direct Age Process of Alloy 718”, Proceedings of 9th Asian Forging Symposium, pp. 533-538, Oct. |
|
61 |
K.S. Park, S.J. Cho, Y.H. Ahn, J.S. Park, J.B. Lee and C.S. Lee |
“Comparison of Fatigue Properties of Welded TMCP Steel and Normalized Steel” Proceedings of Super High Strength Steels, pp. 194, pp. 15 |
|
60 |
J.S. Kim, K.-T. Park, D.L. Lee, C.S. Lee |
“Effect of Intergranular Ferrite on Hydrogen Delayed Fracture Resistance of High Strength Boron-added Steel” Proceedings of Super High Strength Steels, pp. 15 |
|
59 |
B.H. Lee, J.T Yeom and C.S. Lee |
“Prediction of Microstructure Evolutions during Hot-Forging of AZ31 Mg Alloy” The 1st Asian Symposium on Magnesium Alloys, pp. 89-92, Oct. 11-14, Jeju, Korea (2005) |
|
58 |
K.S. Park, D.L. Lee and C.S. Lee |
“Study of the Cold Formability of Drawn Dual-Phase Steels”, Trends in Materials and Manufacturing Technologies for Transportation Industry and Powder Metallurgy Resea |
|
57 |
D.L. Lee, S.J. Yoo, Y.H. Lee, C.S. Lee and W.Y. Choo |
“Development of Non Heat-treated Wire Rods Based on SIDT Technology”, 8th Ultra-Steel Workshop, NIMS, Tsukuba, Japan, pp. 7-12 (2004) |
|
56 |
Y.H. Lee, S.Y. Lee, D.L. Lee, W.Y. Choo and C.S. Lee |
“Formation of Ferrite-Cementite Structure by SIDT in Medium Carbon Steels”, TMP'2004 |
|
55 |
H.S. Lee. D.-G. Lee, Y.H. Lee, S. Lee, C.S. Lee and S.M. Hur |
“Dynamic Deformation and Ballistic Properties of Ti-6Al-4V Alloy”, The 3rd International Conference on Light Materials for Transportation |
|
54 |
Y.G. Ko, C.S. Lee, S.Y. Han and D.H. Shin |
“Superplastic Deformation Behavior of Equal Channel Angular Pressed Ti-6Al-4V Alloy”, The 3rd International Conference on Light Materials for Transportation |
|
53 |
B.H. Lee, K.S. Shin and C.S. Lee |
“High Temperature Deformation Behavior of AZ 31 Mg Alloy”, The 3rd International Conference on Light Materials for Transportation Systems, Honolulu, Hawaii, USA, Nov. |
|
52 |
Jeong Han Kim, Chong Soo Lee and S.L. Semiatin |
“Quantitative Analysis of High Temperature Deformation Mechanisms of Ti-6Al-4V Alloy with Transformed Microstructure”, 2nd Korea-US workshop on Advances |
|
51 |
Y.G. Ko, J.H. Kim, S.Y. Han, C.S. Lee, D.H. Shin and S.L. Semiatin |
“Load Relaxation Behavior of Ultra-fine Grained Ti-6Al-4V Alloy”, 2004 TMS Annual Meeting & Exhibition, Ultra-fine Grained Materials |
|
50 |
Y.H. Lee, T.J. Shin, J.T. Yeom, N.K. Park, S.S. Hong, I.O. Shim, S.M. Hwang, C.S. Lee |
“Prediction of Microstructure during High Temperature Forming of Ti-6Al-4V Alloy”, Proceedings of the ASPF 2003, |
|
49 |
C.S. Lee, D.-G. Lee, Y.H. Lee, S. Lee and S.M. Hur |
“The Effect of Microstructure on the Dynamic Deformation Behavior of Ti-6Al-4V Alloy”, The 10th World Conference on Titanium, Ti-2003, July 13-18, 2 |
|
48 |
N.K. Park, J.T. Yeom, Y.S. Na, C.S. Lee, I.O. Shim and S.S. Hong |
“Deformation Behavior and Microstructure Evolutions in Ti-6Al-4V Extrusion”, Proceedings of THERMEC’2003, July 7-11. Madrid, Spain, pp |
|
47 |
J.H. Kim, S.L. Semiatin and C.S. Lee |
“High Temperature Deformation Behavior of Ti-6Al-4V Alloy with Widmanstätten Microstructure”, Proceedings of THERMEC’2003, July 7-11. Madrid, Spain, pp. 8 (2003) |
|
46 |
H.C. Jung, C.D. Yim, W.W. Park, C.S. Lee and K.S. Shin |
“Fatigue Crack Propagation Behavior of AZ91D Magnesium Alloy”, Proceedings of PSTAM’2003, Jan. 26-30. Osaka, Japan, pp. 75-80 (2003) |
|
45 |
D.-G. Lee, S. Lee, and C.S. Lee |
“Effects of Fine α2-Ti3Al Precipitates on Quasi-static and Dynamic Deformation Behavior in Ti-6Al-4V Alloy”, High Temperature Alloys |
|
44 |
Chong Soo Lee |
“A Microstructural Model for the Prediction of High Cycle Fatigue Life”, US-Korea Workshop on Adavances in Structural Metallic Materials, Hawaii, USA, Jan. 21-23, CD rom file name |
|
43 |
J.S. Park, S.H. Park, C.S. Lee |
“A Microstructural Model for the Prediction of High Cycle Fatigue Life Based on the Small Crack Theory”, Proceedings of the 8th International Fatigue Congress (Fatigue |
|
42 |
J.H. Kim and C.S. Lee |
“High Temperature Deformation Behavior of Gamma TiAl Alloy – Microstructural Evolution and Mechanisms”, Proceedings of the 4th KIM-JIM Symposium, Mar. 28, pp. 8 (2002) |
|
41 |
Y.H. Lee, T.S. Yoon. S.H. Ahn and C. S. Lee |
“Mechanical Properties of 316L Stainless Steel Produced by Metal Injection Molding”, Proceedings of the 2nd Korea-China Symposium on Advanced Steel Technol |
|
40 |
D.-G. Lee, C.S. Lee, S. Kim, S. Lee, and C.S. Lee |
“Correlation of Microstructure with Quasi-Static and Dynamic Deformation Properties of Ti-6Al-4V Alloy”, The 2nd International Conference on Light Ma |
|
39 |
J.H. Kim, D.H. Shin and C.S. Lee |
“High Temperature Deformation Behavior of Fine Duplex Gamma TiAl Alloy”, The 2nd International Conference on Light Materials for Transportation Systems, Busan, Korea, |
|
38 |
H.J. Kim and C.S. Lee |
“Effect of Lamellar Spacing on the Fatigue Crack Propagation Resistance of Fully Lamellar γ-TiAl Alloy”, The 2nd International Conference on Light Materials for Transportation S |
|
37 |
J.S. Park, S.H. Park and C.S. Lee |
“A Microstructural Model for the Prediction of High Cycle Fatigue Life Based on the Small Crack Theory”, The 2nd International Conference on Light Materials for Tran |
|
36 |
J.S. Kim, C.S. Lee, K.Y. Kim |
“The Effect of W Modification of Duplex Stainless Steel on the Behavior of Precipitation of Secondary Phases and Stress Corrosion Cracking”, Proceedings of the 6th Duplex |
|
35 |
C.S. Lee, J.S. Ahn, K.A. Lee, C.G. Park, K.Y. Kim and K.T. Kim |
“Effects of -phase Precipitation on the Mechanical properties of Duplex Stainless Steels”, Proceedings of the 6th Duplex Conference, As |
|
34 |
J.S. Park, K.A. Lee and C.S. Lee |
“Effect of W-addition on Low Cycle Fatigue Behavior of High Cr Ferritic Steels”, Proceedings of the 1st Korea-Japan Structural Dynamic Symposium, pp. 3-11, RCAPAM (19 |
|
33 |
J.S. Park and C.S. Lee |
“Effect of W addition on the Low Cycle Fatigue Behavior of High Cr Ferritic Steels”, Proceedings of the Seventh International Fatigue Congress, eds. X.R. Wu and Z.G. Wang, High |
|
32 |
K.A. Lee, Y.N. Kwon, C.S. Lee and Y.W. Chang |
“An Internal Variable Approach for Anomalous Yield Phenomena”, Proceedings of the 8th Int’l Conf. on Mechanical Behavior of Materials, Vol. 3, pp.1083-108 |
|
31 |
J.S. Kim, J.H. Kim, Y.T. Lee, C.G. Park and C.S. Lee |
“Microstructural Analysis on the Superplastic Deformation Characteristics of Ti-6Al-4V Alloy”, Titanium ’98, Proceedings of Xi’an International Ti |
|
30 |
K.A. Lee, Y.W. Chang and C.S. Lee |
“High Temperature Load Relaxation Behavior of -Brass Alloy”, Proceedings of the 3rd Pacific Rim Int'l Conf. on Adv. Mat. & Processing (PRICM3), TMS, Warrendale, PA, |
|
29 |
J.S. Kim, Y.W. Chang and C.S. Lee |
“Mechanical and Microstructural Analysis on the Superplastic Deformation Behavior of Two Phase Ti-6Al-4V Alloy”, Proc. of 4th Asia-Pacific Symposium on Advances in E |
|
28 |
C.S. Lee, J.H. Huh and K.S. Kim |
“Acoustic Emission Behavior during Tensile Deformation of Welded Steel Joints”, Proc. of 4th Far-East Conference on NDT, KSNT, Cheju-do, Korea, pp. 645-653 (1997) |
|
27 |
C.S. Lee, J.H. Huh and K.S. Kim |
“Acoustic Emission Behavior during the Deformation of Welded Steel Joints”, Proc. of 1st International Conference of Damage and Failure of Interfaces, edited by H.PP. |
|
26 |
T.S. Yoon, C.S. Lee and S.H. Ahn |
“Effect of Tensile Strength on Fatigue Crack Formation and Propagation Behavior of Powder Injection Molded 316L Stainless Steel”, PM2TEC 97, Chicago, IL, MPIF/APMI I |
|
25 |
J.H. Lee, Y.J. Song and C.S. Lee |
“A Study on the Microstructural Evolution during the Superplastic Bulge Forming of Ti-6Al-4V Alloy”, Proceedings of Thermec 97, Wollongong, Australia (1997) |
|
24 |
K.A. Lee, W.J. Nam, S.J. Yoo, N.J. Kim and C.S. Lee |
“The Effect of Tempering Temperature on the High Cycle Fatigue Properties of High Strength Spring Steels”, Proceedings of 9th International Confere |
|
23 |
J.S. Kim, Y.W. Chang and C.S. Lee |
“The Effects of / Volume Fraction on the Superplastic Deformation of Ti-6Al-4V Alloy”, Light Weight Alloys for Aerospace Applications IV, E.W. Lee, W.E. Frazier, K |
|
22 |
C.S. Lee, J.S. Kim, Y.T. Lee, F.H. Froes |
“Superplastic Deformation Behavior of Ti3Al-based Alloys”, Titanium95 |
|
21 |
D.K. Kim, Y.Y. Lee, C.S. Lee and K.Y. Kim |
“Stress Corrosion Behavior of W-Bearing Duplex Stainless Steel in an Aquous Chloride Solution” Proceedings of International Congress Stainless Steels '96, VD |
|
20 |
T.H. Kang, Y.D. Lee, K.Y. Kim and C.S. Lee |
“The Effect of Tungsten Addition on the Fatigue Crack Propagation of Duplex Stainless Steels”, Proceedings of International Congress Stainless Steels '96, V |
|
19 |
C. Choi, Y.T. Lee and C.S. Lee |
“Microstructural Influence on the Fatigue Crack Propagation of Gamma Ti-Al Alloys”, Proceedings of the 2nd Pacific Rim Int'l Conf. on Adv. Mat. & Processing, KIMM, |
|
18 |
K.A. Lee and C.S. Lee |
“Effects of Microstructure and Plate Orientation on the AE Behavior of an Al-Li 8090 Alloy”, Proceedings of the 2nd Pacific Rim Int'l Conf. on Adv. Mat. & Processing, KIMM, |
|
17 |
C.G. Park, C.R. Park, C.S. Lee and Y.W. Chang |
“Interaction between dislocations and grain boundary during plastic deformation and fracture of metals”, Proceedings of 7th Int'l Conf. on Mech. Beha |
|
16 |
Y.W. Chang, C.G. Park, C. S. Lee and T.K. Ha |
“An Internal Variables Theory of Structural Superplasticity”, Proceedings of 7th Int'l Conf. on Mech. Behav. of Materials, ESIS, The Hague, The Nether |
|
15 |
C.S. Lee, C.G. Park and Y.W. Chang |
“Precise Determination of Fatigue Crack Closure in Al Alloys”, Proceedings of 7th Int'l Conf. on Mech. Behav. of Materials, ESIS, The Hague, The Netherlands, pp. 7- |
|
14 |
Ki-Jong Park, Cheol Choi and Chong Soo Lee |
“Microstructural Influence on the Fatigue Crack Propagation of Al-Li 8090 Alloy”, Light Weight Alloys for Aerospace Applications III, TMS, Warrendale, PA, p |
|
13 |
K.J. Hong, H.D. Jeong and C.S. Lee |
“Acoustic Emission Behavior during Plastic Deformation of Al-Li 8090 Alloy”, Progress in Acoustic Emission VII, The Japanese Society for NDI, Sapporo, pp. 113-118 ( |
|
12 |
H.C. Jung, C.R. Park, C.S. Lee and C.G. Park |
“The Relationship Between Microstructure and Compressive Deformation Behavior of Fe3Al Alloys”, Processing, Properties and Applications of Iron Aluminide, |
|
11 |
J.S. Kim, Y.S. Kim, Y.W. Chang and C.S. Lee |
“Superplastic Deformation of Ti-Fe-Ni-Al Alloy”, Microstructure/Property Relationships of Ti Alloy, S. Ankem and J. A. Hall eds., TMS, Warrendale, PA, pp. |
|
10 |
S.B. Lee, J.S. Kim, Y.W. Chang and C.S. Lee |
“A Study on the Superplastic Characteristics of Ti-6Al-4V Alloy”, Metallurgy and Technology of Practical Ti Alloys, S. Fujishiro, D. Eylon and T. Kishi eds |
|
9 |
K.J. Park, C.S.Lee, and Nack J. Kim |
“Effect of Microstructure on the Anisotropic Fatigue Behavior of Al-Li 8090 Alloy”, Proc. of an Int'l Sympp. on LiMat-93, edited by N.J. Kim, CAAM, pp. 171-179 (19 |
|
8 |
W.W. Gerberich, J.A. Kozubowski, T.J. Foecke and C.S. Lee |
“Crystal Orientation Effects on the Process Zone During Fracture of Steel”, Proc. of the Morris Fine Symposium, TMS, Warrendale, PA , pp. 327 |
|
7 |
C.G. Park, C. Choi, C.S. Lee and Y.W. Chang |
“In situ TEM Observations of Crack Tip Dislocation Behaviors under a Mixed Mode Loading”, Proc. of 6th Int'l Conf. on Mech. Behav. of Materials (ICM-6), Ky |
|
6 |
C.S. Lee, K.M. Bae, C.G. Park and Y.W. Chang |
“Microstructural Influence on the Mechanical Properties of Ti-10V-2Fe-3Al”, Proc. of 6th Int'l Conf. on Mech. Behav. of Materials (ICM-6), Kyoto, Japan, V |
|
5 |
K.M. Bae, J.W. Song and C.S. Lee |
“Structure/Property Relationships in a Ti-10V-2Fe-3Al Alloys”, Proc. of Int'l Sympp. on the Rapidly Solidified Materials and Advanced Materials for Aerospace, Daejeon |
|
4 |
C.G. Park, C.S. Lee and Y.W. Chang |
“Direct Observation of Crack Tip Phenomena and a Dislocation Model of Fracture”, Fracture and Strength '90, Seoul, Korea, pp. 145-151 (1990) |
|
3 |
Y.W. Chang, C.S. Lee and C.G. Park |
“Development of Inelastic Constitutive Relations”, Fracture and Strength '90, Seoul, Korea, pp. 520-526 (1990) |
|
2 |
C.S. Lee, S.J. Kim, C.G. Park and Y.W. Chang |
“The Effect of Microstructural Variation on the Mechanical Properties of Ti-10V-2Fe-3Al Alloys”, Fracture and Strength '90, Seoul, Korea, pp. 260-265 ( |
|
1 |
Chong Soo Lee and H. Margolin |
“Deformation of Bimetallic Bicrystals of *-Ti/*-Ti-13Mn”, Proceedings of the 5th Int*l Conf. on Ti. Germany, pp. 1875-1882 (1985) |
|